前面部分是第一批板子gel输出的信息： C674X_0: GEL Output: --------------------------------------------- C674X_0: GEL Output: | Device Information | C674X_0: GEL Output: --------------------------------------------- C674X_0: GEL Output: DEV_INFO_00 = 0x9B7DF02F C674X_0: GEL Output: DEV_INFO_01 = 0x00000000 C674X_0: GEL Output: DEV_INFO_02 = 0x0000F375 C674X_0: GEL Output: DEV_INFO_03 = 0x00000004 C674X_0: GEL Output: DEV_INFO_04 = 0x00000000 C674X_0: GEL Output: DEV_INFO_05 = 0x000003E0 C674X_0: GEL Output: DEV_INFO_06 = 0x80200200 C674X_0: GEL Output: DEV_INFO_07-DEV_INFO_08-DEV_INFO_09-DEV_INFO_10-DEV_INFO_11-DEV_INFO_12 = 8-0-165113-2-36-33 C674X_0: GEL Output: DEV_INFO_13,DEV_INFO_14,DEV_INFO_15,DEV_INFO_16 = 2,0,0,769 C674X_0: GEL Output: ----- C674X_0: GEL Output: DEV_INFO_17 = 0x00030003 C674X_0: GEL Output: DEV_INFO_18 = 0x00000000 C674X_0: GEL Output: DEV_INFO_19 =C674X_0: GEL Output: 0C674X_0: GEL Output: 0C674X_0: GEL Output: 0C674X_0: GEL Output: 0C674X_0: GEL Output: 0C674X_0: GEL Output: C674X_0: GEL Output: ----- C674X_0: GEL Output: DEV_INFO_20 = 0x30303864 C674X_0: GEL Output: DEV_INFO_21 = 0x3530306B C674X_0: GEL Output: DEV_INFO_22 = 0x00000000 C674X_0: GEL Output: DEV_INFO_23 = 0x00000000 C674X_0: GEL Output: ----- C674X_0: GEL Output: DEV_INFO_24 = 0x02021024 C674X_0: GEL Output: DEV_INFO_25 = 0x080284F9 C674X_0: GEL Output: DEV_INFO_06 = 0x80200200 C674X_0: GEL Output: DEV_INFO_26 = 0x06020002 C674X_0: GEL Output: C674X_0: GEL Output: --------------------------------------------- C674X_0: GEL Output: | BOOTROM Info | C674X_0: GEL Output: --------------------------------------------- C674X_0: GEL Output: ROM ID: d800k005 C674X_0: GEL Output: Silicon Revision 3.0 C674X_0: GEL Output: Boot pins: 62325 C674X_0: GEL Output: Boot Mode: SPI0 Flash (0x0000F375) C674X_0: GEL Output: ROM Status Code: 0x00000000 Description:C674X_0: GEL Output: No error C674X_0: GEL Output: Program Counter (PC) = 0x80007C00 C674X_0: GEL Output: C674X_0: GEL Output: --------------------------------------------- C674X_0: GEL Output: | Clock Information | C674X_0: GEL Output: --------------------------------------------- C674X_0: GEL Output: C674X_0: GEL Output: PLLs configured to utilize crystal. C674X_0: GEL Output: ASYNC3 = PLL0_SYSCLK2 C674X_0: GEL Output: C674X_0: GEL Output: NOTE: All clock frequencies in following PLL sections are based C674X_0: GEL Output: off OSCIN = 24 MHz. If that value does not match your hardware C674X_0: GEL Output: you should change the #define in the top of the gel file, save it, C674X_0: GEL Output: and then reload. C674X_0: GEL Output: C674X_0: GEL Output: --------------------------------------------- C674X_0: GEL Output: | PLL0 Information | C674X_0: GEL Output: --------------------------------------------- C674X_0: GEL Output: C674X_0: GEL Output: PLL0_SYSCLK1 = 300 MHz C674X_0: GEL Output: PLL0_SYSCLK2 = 150 MHz C674X_0: GEL Output: PLL0_SYSCLK3 = 100 MHz C674X_0: GEL Output: PLL0_SYSCLK4 = 75 MHz C674X_0: GEL Output: PLL0_SYSCLK5 = 50 MHz C674X_0: GEL Output: PLL0_SYSCLK6 = 300 MHz C674X_0: GEL Output: PLL0_SYSCLK7 = 37 MHz C674X_0: GEL Output: C674X_0: GEL Output: --------------------------------------------- C674X_0: GEL Output: | PSC0 Information | C674X_0: GEL Output: --------------------------------------------- C674X_0: GEL Output: C674X_0: GEL Output: State Decoder: C674X_0: GEL Output: 0 = SwRstDisable (reset asserted, clock off) C674X_0: GEL Output: 1 = SyncReset (reset assered, clock on) C674X_0: GEL Output: 2 = Disable (reset de-asserted, clock off) C674X_0: GEL Output: 3 = Enable (reset de-asserted, clock on) C674X_0: GEL Output: >3 = Transition in progress C674X_0: GEL Output: C674X_0: GEL Output: Module 0: EDMA3CC (0) STATE = 3 C674X_0: GEL Output: Module 1: EDMA3 TC0 STATE = 3 C674X_0: GEL Output: Module 2: EDMA3 TC1 STATE = 3 C674X_0: GEL Output: Module 3: EMIFA (BR7) STATE = 3 C674X_0: GEL Output: Module 4: SPI 0 STATE = 3 C674X_0: GEL Output: Module 5: MMC/SD 0 STATE = 3 C674X_0: GEL Output: Module 6: AINTC STATE = 3 C674X_0: GEL Output: Module 7: ARM RAM/ROM STATE = 3 C674X_0: GEL Output: Module 9: UART 0 STATE = 3 C674X_0: GEL Output: Module 10: SCR 0 (BR0/1/2/8) STATE = 3 C674X_0: GEL Output: Module 11: SCR 1 (BR4) STATE = 3 C674X_0: GEL Output: Module 12: SCR 2 (BR3/5/6) STATE = 3 C674X_0: GEL Output: Module 13: PRUSS STATE = 3 C674X_0: GEL Output: Module 14: ARM STATE = 0 C674X_0: GEL Output: Module 15: DSP STATE = 3 C674X_0: GEL Output: C674X_0: GEL Output: --------------------------------------------- C674X_0: GEL Output: | PSC1 Information | C674X_0: GEL Output: --------------------------------------------- C674X_0: GEL Output: C674X_0: GEL Output: State Decoder: C674X_0: GEL Output: 0 = SwRstDisable (reset asserted, clock off) C674X_0: GEL Output: 1 = SyncReset (reset assered, clock on) C674X_0: GEL Output: 2 = Disable (reset de-asserted, clock off) C674X_0: GEL Output: 3 = Enable (reset de-asserted, clock on) C674X_0: GEL Output: >3 = Transition in progress C674X_0: GEL Output: C674X_0: GEL Output: Module 1: USB0 (2.0) STATE = 3 C674X_0: GEL Output: Module 2: USB1 (1.1) STATE = 3 C674X_0: GEL Output: Module 3: GPIO STATE = 3 C674X_0: GEL Output: Module 4: UHPI STATE = 3 C674X_0: GEL Output: Module 5: EMAC STATE = 3 C674X_0: GEL Output: Module 6: EMIFB (BR20) STATE = 3 C674X_0: GEL Output: Module 7: MCASP0 + FIFO STATE = 3 C674X_0: GEL Output: Module 8: MCASP1 + FIFO STATE = 3 C674X_0: GEL Output: Module 9: MCASP2 + FIFO STATE = 3 C674X_0: GEL Output: Module 10: SPI 1 STATE = 3 C674X_0: GEL Output: Module 11: I2C 1 STATE = 3 C674X_0: GEL Output: Module 12: UART 1 STATE = 3 C674X_0: GEL Output: Module 13: UART 2 STATE = 3 C674X_0: GEL Output: Module 16: LCDC STATE = 3 C674X_0: GEL Output: Module 17: eHRPWM (all) STATE = 3 C674X_0: GEL Output: Module 20: eCAP (all) STATE = 3 C674X_0: GEL Output: Module 21: eQEP 0/1 STATE = 3 C674X_0: GEL Output: Module 24: SCR8 (Br15) STATE = 3 C674X_0: GEL Output: Module 25: SCR7 (Br12) STATE = 3 C674X_0: GEL Output: Module 26: SCR12 (Br18) STATE = 3 C674X_0: GEL Output: Module 31: L3 RAM (Br13) STATE = 3 /********************************************************************************************** **********************************************************************************************/ 第二批板子gel输出的信息： C674X_0: GEL Output: --------------------------------------------- C674X_0: GEL Output: | Device Information | C674X_0: GEL Output: --------------------------------------------- C674X_0: GEL Output: DEV_INFO_00 = 0x9B7DF02F C674X_0: GEL Output: DEV_INFO_01 = 0x00000000 C674X_0: GEL Output: DEV_INFO_02 = 0x04F8F365 C674X_0: GEL Output: DEV_INFO_03 = 0x00000000 C674X_0: GEL Output: DEV_INFO_04 = 0x00000000 C674X_0: GEL Output: DEV_INFO_05 = 0x00000000 C674X_0: GEL Output: DEV_INFO_06 = 0x00000E03 C674X_0: GEL Output: DEV_INFO_07-DEV_INFO_08-DEV_INFO_09-DEV_INFO_10-DEV_INFO_11-DEV_INFO_12 = 31-1-1969676-48-0-828 C674X_0: GEL Output: DEV_INFO_13,DEV_INFO_14,DEV_INFO_15,DEV_INFO_16 = 0,0,0,8192 C674X_0: GEL Output: ----- C674X_0: GEL Output: DEV_INFO_17 = 0x00030303 C674X_0: GEL Output: DEV_INFO_18 = 0x00000000 C674X_0: GEL Output: DEV_INFO_19 =C674X_0: GEL Output: 0C674X_0: GEL Output: 0C674X_0: GEL Output: 0C674X_0: GEL Output: 1C674X_0: GEL Output: 1C674X_0: GEL Output: C674X_0: GEL Output: ----- C674X_0: GEL Output: DEV_INFO_20 = 0x0001E000 C674X_0: GEL Output: DEV_INFO_21 = 0x0001E000 C674X_0: GEL Output: DEV_INFO_22 = 0x00000000 C674X_0: GEL Output: DEV_INFO_23 = 0x00000000 C674X_0: GEL Output: ----- C674X_0: GEL Output: DEV_INFO_24 = 0x3033C000 C674X_0: GEL Output: DEV_INFO_25 = 0x3F1E0E0C C674X_0: GEL Output: DEV_INFO_06 = 0x00000E03 C674X_0: GEL Output: DEV_INFO_26 = 0xC0000000 C674X_0: GEL Output: C674X_0: GEL Output: --------------------------------------------- C674X_0: GEL Output: | BOOTROM Info | C674X_0: GEL Output: --------------------------------------------- C674X_0: GEL Output: ROM ID: d800k176-47-48 C674X_0: GEL Output: Silicon Revision UNKNOWN C674X_0: GEL Output: Boot pins: 83424101 C674X_0: GEL Output: Boot Mode: INVALID (0x04F8F365) C674X_0: GEL Output: ROM Status Code: 0x0000009F Description:C674X_0: GEL Output: Error code not recognized C674X_0: GEL Output: Program Counter (PC) = 0x80003F74 C674X_0: GEL Output: C674X_0: GEL Output: --------------------------------------------- C674X_0: GEL Output: | Clock Information | C674X_0: GEL Output: --------------------------------------------- C674X_0: GEL Output: C674X_0: GEL Output: PLLs configured to utilize crystal. C674X_0: GEL Output: ASYNC3 = PLL0_SYSCLK2 C674X_0: GEL Output: C674X_0: GEL Output: NOTE: All clock frequencies in following PLL sections are based C674X_0: GEL Output: off OSCIN = 24 MHz. If that value does not match your hardware C674X_0: GEL Output: you should change the #define in the top of the gel file, save it, C674X_0: GEL Output: and then reload. C674X_0: GEL Output: C674X_0: GEL Output: --------------------------------------------- C674X_0: GEL Output: | PLL0 Information | C674X_0: GEL Output: --------------------------------------------- C674X_0: GEL Output: C674X_0: GEL Output: PLL0_SYSCLK1 = 24 MHz C674X_0: GEL Output: PLL0_SYSCLK2 = 12 MHz C674X_0: GEL Output: PLL0_SYSCLK3 = 8 MHz C674X_0: GEL Output: PLL0_SYSCLK4 = 6 MHz C674X_0: GEL Output: PLL0_SYSCLK5 = 8 MHz C674X_0: GEL Output: PLL0_SYSCLK6 = 24 MHz C674X_0: GEL Output: PLL0_SYSCLK7 = 4 MHz C674X_0: GEL Output: C674X_0: GEL Output: --------------------------------------------- C674X_0: GEL Output: | PLL1 Information | C674X_0: GEL Output: --------------------------------------------- C674X_0: GEL Output: C674X_0: GEL Output: PLL1_SYSCLK1 = 24 MHz C674X_0: GEL Output: PLL1_SYSCLK2 = 24 MHz C674X_0: GEL Output: PLL1_SYSCLK3 = 24 MHz C674X_0: GEL Output: C674X_0: GEL Output: --------------------------------------------- C674X_0: GEL Output: | PSC0 Information | C674X_0: GEL Output: --------------------------------------------- C674X_0: GEL Output: C674X_0: GEL Output: State Decoder: C674X_0: GEL Output: 0 = SwRstDisable (reset asserted, clock off) C674X_0: GEL Output: 1 = SyncReset (reset assered, clock on) C674X_0: GEL Output: 2 = Disable (reset de-asserted, clock off) C674X_0: GEL Output: 3 = Enable (reset de-asserted, clock on) C674X_0: GEL Output: >3 = Transition in progress C674X_0: GEL Output: C674X_0: GEL Output: Module 0: EDMA3CC (0) STATE = 0 C674X_0: GEL Output: Module 1: EDMA3 TC0 STATE = 0 C674X_0: GEL Output: Module 2: EDMA3 TC1 STATE = 0 C674X_0: GEL Output: Module 3: EMIFA (BR7) STATE = 0 C674X_0: GEL Output: Module 4: SPI 0 STATE = 0 C674X_0: GEL Output: Module 5: MMC/SD 0 STATE = 0 C674X_0: GEL Output: Module 6: AINTC STATE = 3 C674X_0: GEL Output: Module 7: ARM RAM/ROM STATE = 3 C674X_0: GEL Output: Module 9: UART 0 STATE = 0 C674X_0: GEL Output: Module 10: SCR 0 (BR0/1/2/8) STATE = 3 C674X_0: GEL Output: Module 11: SCR 1 (BR4) STATE = 3 C674X_0: GEL Output: Module 12: SCR 2 (BR3/5/6) STATE = 3 C674X_0: GEL Output: Module 13: PRUSS STATE = 0 C674X_0: GEL Output: Module 14: ARM STATE = 0 C674X_0: GEL Output: Module 15: DSP STATE = 3 C674X_0: GEL Output: C674X_0: GEL Output: --------------------------------------------- C674X_0: GEL Output: | PSC1 Information | C674X_0: GEL Output: --------------------------------------------- C674X_0: GEL Output: C674X_0: GEL Output: State Decoder: C674X_0: GEL Output: 0 = SwRstDisable (reset asserted, clock off) C674X_0: GEL Output: 1 = SyncReset (reset assered, clock on) C674X_0: GEL Output: 2 = Disable (reset de-asserted, clock off) C674X_0: GEL Output: 3 = Enable (reset de-asserted, clock on) C674X_0: GEL Output: >3 = Transition in progress C674X_0: GEL Output: C674X_0: GEL Output: Module 0: EDMA3CC (1) STATE = 0 C674X_0: GEL Output: Module 1: USB0 (2.0) STATE = 0 C674X_0: GEL Output: Module 2: USB1 (1.1) STATE = 0 C674X_0: GEL Output: Module 3: GPIO STATE = 0 C674X_0: GEL Output: Module 4: UHPI STATE = 0 C674X_0: GEL Output: Module 5: EMAC STATE = 0 C674X_0: GEL Output: Module 6: DDR2 and SCR F3 STATE = 0 C674X_0: GEL Output: Module 7: MCASP0 + FIFO STATE = 0 C674X_0: GEL Output: Module 8: SATA STATE = 0 C674X_0: GEL Output: Module 9: VPIF STATE = 0 C674X_0: GEL Output: Module 10: SPI 1 STATE = 0 C674X_0: GEL Output: Module 11: I2C 1 STATE = 0 C674X_0: GEL Output: Module 12: UART 1 STATE = 0 C674X_0: GEL Output: Module 13: UART 2 STATE = 0 C674X_0: GEL Output: Module 14: MCBSP0 + FIFO STATE = 0 C674X_0: GEL Output: Module 15: MCBSP1 + FIFO STATE = 0 C674X_0: GEL Output: Module 16: LCDC STATE = 0 C674X_0: GEL Output: Module 17: eHRPWM (all) STATE = 0 C674X_0: GEL Output: Module 18: MMC/SD 1 STATE = 0 C674X_0: GEL Output: Module 19: UPP STATE = 0 C674X_0: GEL Output: Module 20: eCAP (all) STATE = 0 C674X_0: GEL Output: Module 21: EDMA3 TC2 STATE = 0 C674X_0: GEL Output: Module 24: SCR-F0 Br-F0 STATE = 3 C674X_0: GEL Output: Module 25: SCR-F1 Br-F1 STATE = 3 C674X_0: GEL Output: Module 26: SCR-F2 Br-F2 STATE = 3 C674X_0: GEL Output: Module 27: SCR-F6 Br-F3 STATE = 0 C674X_0: GEL Output: Module 28: SCR-F7 Br-F4 STATE = 0 C674X_0: GEL Output: Module 29: SCR-F8 Br-F5 STATE = 0 C674X_0: GEL Output: Module 30: Br-F7 (DDR Contr) STATE = 0 C674X_0: GEL Output: Module 31: L3 RAM, SCR-F4, Br-F6 STATE = 3