
{==============================================================================}
{====  String Utility Routines  ===============================================}
{==============================================================================}

Function CheckLeft(BaseStr: String, Srch: String): Boolean;
Var
    i : Integer;
Begin
    Result := False;
    i := Length(Srch);
    If Length(BaseStr) < i Then Exit;
    If Copy(BaseStr, 1, i) = Srch Then Result := True;
End;

Function LeftOf(BaseStr: String, Srch: String): String;
Var
    i : Integer;
Begin
    i := Pos(Srch, BaseStr);
    If i > 0 Then Begin
        Result := Copy(BaseStr, 1, i - 1);
    End Else Begin
        Result := BaseStr;
    End;
End;

Function RightOf(BaseStr: String, Srch: String): String;
Var
    i, ls : Integer;
Begin
    i := Pos(Srch, BaseStr);
    If i > 0 Then Begin
        ls := Length(Srch);
        Result := Copy(BaseStr, i + ls, Length(BaseStr) - i + ls);
    End Else Begin
        Result := '';
    End;
End;

Procedure StrChop(BaseStr: String, Srch: String, Out LeftSide: String, Out RightSide: String);
Var
    i, ls : Integer;
Begin
    i := Pos(Srch, BaseStr);
    If i <= 0 Then Begin
        LeftSide := BaseStr;
        RightSide := '';
    End Else Begin
        ls := Length(Srch);
        LeftSide := Copy(BaseStr, 1, i - 1);
        RightSide := Copy(BaseStr, i + ls, Length(BaseStr) - i + ls);
    End;
End;

Function GetBetween(BaseStr: String, StartStr: String, EndStr: String): String;
Begin
    Result := Leftof(RightOf(BaseStr, StartStr), EndStr);
End;

{==============================================================================}
{====  Footprint Routines  ====================================================}
{==============================================================================}

Function LayerFromString(LName: String): TLayer;
Begin
    Case LName Of
    'NoLayer':         Result := eNoLayer;
    'TopLayer':        Result := eTopLayer;
    'MidLayer1':       Result := eMidLayer1;
    'MidLayer2':       Result := eMidLayer2;
    'MidLayer3':       Result := eMidLayer3;
    'MidLayer4':       Result := eMidLayer4;
    'MidLayer5':       Result := eMidLayer5;
    'MidLayer6':       Result := eMidLayer6;
    'MidLayer7':       Result := eMidLayer7;
    'MidLayer8':       Result := eMidLayer8;
    'MidLayer9':       Result := eMidLayer9;
    'MidLayer10':      Result := eMidLayer10;
    'MidLayer11':      Result := eMidLayer11;
    'MidLayer12':      Result := eMidLayer12;
    'MidLayer13':      Result := eMidLayer13;
    'MidLayer14':      Result := eMidLayer14;
    'MidLayer15':      Result := eMidLayer15;
    'MidLayer16':      Result := eMidLayer16;
    'MidLayer17':      Result := eMidLayer17;
    'MidLayer18':      Result := eMidLayer18;
    'MidLayer19':      Result := eMidLayer19;
    'MidLayer20':      Result := eMidLayer20;
    'MidLayer21':      Result := eMidLayer21;
    'MidLayer22':      Result := eMidLayer22;
    'MidLayer23':      Result := eMidLayer23;
    'MidLayer24':      Result := eMidLayer24;
    'MidLayer25':      Result := eMidLayer25;
    'MidLayer26':      Result := eMidLayer26;
    'MidLayer27':      Result := eMidLayer27;
    'MidLayer28':      Result := eMidLayer28;
    'MidLayer29':      Result := eMidLayer29;
    'MidLayer30':      Result := eMidLayer30;
    'BottomLayer':     Result := eBottomLayer;
    'TopOverlay':      Result := eTopOverlay;
    'BottomOverlay':   Result := eBottomOverlay;
    'TopPaste':        Result := eTopPaste;
    'BottomPaste':     Result := eBottomPaste;
    'TopSolder':       Result := eTopSolder;
    'BottomSolder':    Result := eBottomSolder;
    'InternalPlane1':  Result := eInternalPlane1;
    'InternalPlane2':  Result := eInternalPlane2;
    'InternalPlane3':  Result := eInternalPlane3;
    'InternalPlane4':  Result := eInternalPlane4;
    'InternalPlane5':  Result := eInternalPlane5;
    'InternalPlane6':  Result := eInternalPlane6;
    'InternalPlane7':  Result := eInternalPlane7;
    'InternalPlane8':  Result := eInternalPlane8;
    'InternalPlane9':  Result := eInternalPlane9;
    'InternalPlane10': Result := eInternalPlane10;
    'InternalPlane11': Result := eInternalPlane11;
    'InternalPlane12': Result := eInternalPlane12;
    'InternalPlane13': Result := eInternalPlane13;
    'InternalPlane14': Result := eInternalPlane14;
    'InternalPlane15': Result := eInternalPlane15;
    'InternalPlane16': Result := eInternalPlane16;
    'DrillGuide':      Result := eDrillGuide;
    'KeepOutLayer':    Result := eKeepOutLayer;
    'Mechanical1':     Result := eMechanical1;
    'Mechanical2':     Result := eMechanical2;
    'Mechanical3':     Result := eMechanical3;
    'Mechanical4':     Result := eMechanical4;
    'Mechanical5':     Result := eMechanical5;
    'Mechanical6':     Result := eMechanical6;
    'Mechanical7':     Result := eMechanical7;
    'Mechanical8':     Result := eMechanical8;
    'Mechanical9':     Result := eMechanical9;
    'Mechanical10':    Result := eMechanical10;
    'Mechanical11':    Result := eMechanical11;
    'Mechanical12':    Result := eMechanical12;
    'Mechanical13':    Result := eMechanical13;
    'Mechanical14':    Result := eMechanical14;
    'Mechanical15':    Result := eMechanical15;
    'Mechanical16':    Result := eMechanical16;
    'DrillDrawing':    Result := eDrillDrawing;
    'MultiLayer':      Result := eMultiLayer;
    'ConnectLayer':    Result := eConnectLayer;
    'BackGroundLayer': Result := eBackGroundLayer;
    'DRCErrorLayer':   Result := eDRCErrorLayer;
    'HighlightLayer':  Result := eHighlightLayer;
    'GridColor1':      Result := eGridColor1;
    'GridColor10':     Result := eGridColor10;
    'PadHoleLayer':    Result := ePadHoleLayer;
    'ViaHoleLayer':    Result := eViaHoleLayer;
    Else
        Result := eNoLayer;
    End;
End;

Procedure FP_AddLine(fp: IPCB_Component, Data: String);
Var
    lin : IPCB_track;
    s1, s2 : String;
Begin
    lin := PCBServer.PCBObjectFactory(eTrackObject, eNoDimension, eCreate_Default);
    If lin = Nil Then Exit;
    StrChop(GetBetween(Data, '(Start ', ')'), ',', s1, s2);
    lin.X1 := MilsToCoord(Evaluate(s1));
    lin.Y1 := MilsToCoord(Evaluate(s2));
    StrChop(GetBetween(Data, '(End ', ')'), ',', s1, s2);
    lin.X2 := MilsToCoord(Evaluate(s1));
    lin.Y2 := MilsToCoord(Evaluate(s2));
    lin.Layer := LayerFromString(GetBetween(Data, '(Layer ', ')'));
    lin.Width := MilsToCoord(Evaluate(GetBetween(Data, '(Width ', ')')));
    fp.AddPCBObject(lin);
    PCBServer.SendMessageToRobots(fp.I_ObjectAddress, c_Broadcast, PCBM_BoardRegisteration, lin.I_ObjectAddress);
End;

Procedure FP_AddArc(fp: IPCB_Component, Data: String);
Var
    arc : IPCB_Arc;
    s1, s2 : String;
Begin
    arc := PCBServer.PCBObjectFactory(eArcObject, eNoDimension, eCreate_Default);
    If arc = Nil Then Exit;
    StrChop(GetBetween(Data, '(Location ', ')'), ',', s1, s2);
    arc.XCenter := MilsToCoord(Evaluate(s1));
    arc.YCenter := MilsToCoord(Evaluate(s2));
    arc.Radius := MilsToCoord(Evaluate(GetBetween(Data, '(Radius ', ')')));
    arc.LineWidth := MilsToCoord(Evaluate(GetBetween(Data, '(Width ', ')')));
    arc.StartAngle := Evaluate(GetBetween(Data, '(StartAngle ', ')'));
    arc.EndAngle := Evaluate(GetBetween(Data, '(EndAngle ', ')'));
    arc.Layer := LayerFromString(GetBetween(Data, '(Layer ', ')'));;
    fp.AddPCBObject(arc);
    PCBServer.SendMessageToRobots(fp.I_ObjectAddress, c_Broadcast, PCBM_BoardRegisteration, arc.I_ObjectAddress);
End;

Procedure FP_AddPoly(fp: IPCB_Component, Data: String, InFile: TextFile);
Var
    pol : IPCB_Region;
    cont : IPCB_Contour;
    pc: Integer;
    s1, s2, inp, tag : String;
Begin
    pol := PCBServer.PCBObjectFactory(eRegionObject, eNoDimension,eCreate_Default);
    If pol = Nil Then Exit;
    cont := pol.MainContour.Replicate();
    pol.Layer := LayerFromString(GetBetween(Data, '(Layer ', ')'));
    cont.Count := Evaluate(GetBetween(Data, '(PointCount ', ')'));
    pc := 0;
    While Not EOF(InFile) Do Begin
        ReadLn(InFile, inp);
        If VarIsNull(inp) Then Continue;
        inp := Trim(inp);
        StrChop(inp, ' ', tag, inp);
        tag := Trim(tag);
        Case tag Of
        'Point': Begin
            pc := pc + 1;
            StrChop(GetBetween(inp, '(', ')'), ',', s1, s2);
            cont.X[pc] := MilsToCoord(Evaluate(s1));
            cont.Y[pc] := MilsToCoord(Evaluate(s2));
            End;
        'EndPolygon': Break;
        Else Begin
            ShowMessage('Keyword Error: ' + tag);
            End;
        End;
    End;
    pol.SetOutlineContour(cont);
    If GetBetween(Data, '(Type ', ')') = 'KeepOut' Then Begin
        pol.IsKeepout := True;
    End;
    fp.AddPCBObject(pol);
    PCBServer.SendMessageToRobots(fp.I_ObjectAddress, c_Broadcast, PCBM_BoardRegisteration, pol.I_ObjectAddress);
End;

Procedure FP_AddText(fp: IPCB_Component, Data: STring);
Var
    txt : IPCB_Text;
    s1, s2 : String;
Begin
    txt := PCBServer.PCBObjectFactory(eTextObject, eNoDimension, eCreate_Default);
    If txt = Nil Then Exit;
    StrChop(GetBetween(Data, '(Location ', ')'), ',', s1, s2);
    txt.XLocation := MilsToCoord(Evaluate(s1));
    txt.YLocation := MilsToCoord(Evaluate(s2));
    txt.Layer := LayerFromString(GetBetween(Data, '(Layer ', ')'));
    txt.Size := MilsToCoord(Evaluate(GetBetween(Data, '(Height ', ')')));
    txt.Width := MilsToCoord(Evaluate(GetBetween(Data, '(Width ', ')')));
    If GetBetween(Data, '(Mirrored ', ')') = 'True' Then Begin
        txt.MirrorFlag := True;
    End;
    txt.Rotation := Evaluate(GetBetween(Data, '(Rotation ', ')'));
    txt.Text := GetBetween(Data, '(Value "', '")');
    // Justification? NOTE: TODO:
    fp.AddPCBObject(txt);
    PCBServer.SendMessageToRobots(fp.I_ObjectAddress, c_Broadcast, PCBM_BoardRegisteration, txt.I_ObjectAddress);
End;

Procedure FP_AddPad(fp: IPCB_Component, Data: String, InFile: TextFile);
Var
    s1, s2, inp, tag, lay : String;
    pad : IPCB_Pad;
    padsh : TShape;
    cache : TPadCache;
Begin
    pad := PcbServer.PCBObjectFactory(ePadObject, eNoDimension, eCreate_Default);
    pad.Name := GetBetween(Data, '(Name "', '")');
//    pad.Layer := LayerFromString(GetBetween(Data, '(Layer ', ')'));
    StrChop(GetBetween(Data, '(Location ', ')'), ',', s1, s2);
    pad.X := MilsToCoord(Evaluate(s1));
    pad.Y := MilsToCoord(Evaluate(s2));
    pad.Rotation := Evaluate(GetBetween(Data, '(Rotation ', ')')); // 2010-07-06 gbn
//    pad.Mode := ePadMode_LocalStack; // ePadMode_Simple, ePadMode_ExternalStack
    s1 := GetBetween(Data, '(ExpandPaste ', ')');
    s2 := GetBetween(Data, '(ExpandMask ', ')');
    If s1 <> '' || s2 <> '' Then Begin
       cache := pad.Cache;
       If s1 <> '' Then Begin
          cache.PasteMaskExpansionValid := eCacheManual;
          cache.PasteMaskExpansion := MilsToCoord(Evaluate(s1));
       End;
       If s2 <> '' Then Begin
          cache.SolderMaskExpansionValid := eCacheManual;
          cache.SolderMaskExpansion := MilsToCoord(Evaluate(s2));
       End;
       pad.Cache := cache;
    End;
    If GetBetween(Data, '(Surface ', ')') = 'True' Then Begin
        pad.Mode := ePadMode_Simple;
        pad.Layer := eTopLayer;
    End Else Begin
        pad.Mode := ePadMode_LocalStack;
    End;
    pad.HoleType := eRoundHole; // eSquareHole, eSlotHole
    pad.HoleSize := MilsToCoord(Evaluate(GetBetween(Data, '(HoleSize ', ')')));
    While Not EOF(InFile) Do Begin
        ReadLn(InFile, inp);
        If VarIsNull(inp) Then Continue;
        inp := Trim(inp);
        StrChop(inp, ' ', tag, inp);
        tag := Trim(tag);
        Case tag Of
        'PadShape': Begin
            padsh := eNoShape;
            StrChop(GetBetween(inp, '(Size ', ')'), ',', s1, s2);
            Case GetBetween(inp, '(Shape ', ')') Of
            'NoShape': padsh := eNoShape;
            'Rounded': padsh := eRounded;
            'Rectangular': padsh := eRectangular;
            'Octagonal': padsh := eOctagonal;
            'CircleShape': padsh := eCircleShape;
            'ArcShape': padsh := eArcShape;
            'Terminator': padsh := eTerminator;
            'RoundedRectangle': padsh := eRoundRectShape;
            'RotatedRectangle': padsh := eRotatedRectShape;
            Else padsh := eNoShape;
            End;
            lay := GetBetween(inp, '(Layer ', ')');
            If CheckLeft(lay, 'Top') Then Begin
                pad.TopShape := padsh;
                pad.TopXSize := MilsToCoord(Evaluate(s1));
                pad.TopYSize := MilsToCoord(Evaluate(s2));
            End Else If CheckLeft(lay, 'Mid') Then Begin
                pad.MidShape := padsh;
                pad.MidXSize := MilsToCoord(Evaluate(s1));
                pad.MidYSize := MilsToCoord(Evaluate(s2));
            End Else If CheckLeft(lay, 'Bot') Then Begin
                pad.BotShape := padsh;
                pad.BotXSize := MilsToCoord(Evaluate(s1));
                pad.BotYSize := MilsToCoord(Evaluate(s2));
            End;
            End;
        'EndPad': Begin
            Break;
            End;
        Else Begin
            ShowMessage('Keyword Error: ' + tag);
            End;
        End;
    End;
    fp.AddPCBObject(pad);
    PCBServer.SendMessageToRobots(fp.I_ObjectAddress, c_Broadcast, PCBM_BoardRegisteration, pad.I_ObjectAddress);
End;

Procedure ImportFootprints(InFile: TextFile, Lib: IPCB_Library, Errors: TStringList);
Var
    inp, tag, s, t : String;
    fp : IPCB_Component;
Begin
    While Not EOF(InFile) Do Begin
        ReadLn(InFile, inp);
        If VarIsNull(inp) Then Continue;
        inp := Trim(inp);

        StrChop(inp, ' ', tag, inp);
        tag := Trim(tag);
        Case tag Of
        'Footprint': Begin
            // create a footprint reference
            fp := PCBServer.CreatePCBLibComp();
            If fp = Nil Then Begin
                Errors.Add('Error creating footprint.');
                Break;
            End;
            // add data to it
            fp.Name := GetBetween(inp, '(Name "', '")');
            // assign it to library
            Lib.RegisterComponent(fp);
            PCBServer.PreProcess();
            // add data to it
            fp.BeginModify();
            // set height
            t := GetBetween(inp, '(Height ', ')');
            If t <> '' Then Begin
                fp.Height := MilsToCoord(Evaluate(t));
            End;

            While Not EOF(InFile) Do Begin
                ReadLn(InFile, inp);
                If VarIsNull(inp) Then Continue;
                inp := Trim(inp);
                If CheckLeft(inp, '#') Then Continue;

                StrChop(inp, ' ', tag, inp);
                tag := Trim(tag);
                Case tag Of
                'Pad': Begin
                    FP_AddPad(fp, inp, InFile);
                    End;
                'Line': Begin
                    FP_AddLine(fp, inp);
                    End;
                'Arc': Begin
                    FP_AddArc(fp, inp);
                    End;
                'Polygon': Begin
                    FP_AddPoly(fp, inp, InFile);
                    End;
                'Text': Begin
                    FP_AddText(fp, inp);
                    End;
                'EndFootprint': Begin
                    //ShowMessage('EndFootprint');
                    Break;
                    End;
                '': Continue;
                Else Begin
                    ShowMessage('Keyword Error: ' + tag);
                    Break;
                    End;
                End;
            End; // while not eof()
            fp.EndModify();
            PCBServer.PostProcess();
            // done with footprint
            End;
        'EndFootprints': Begin
            //ShowMessage('EndFootprint');
            Break;
            End;
        '': Continue;
        Else Begin
            ShowMessage('Keyword Error: ' + tag);
            Break;
            End;
        End; // case tag
    End; // while not eof()
    PCBServer.PostProcess();
End;

{==============================================================================}
{====  Symbol Routines  =======================================================}
{==============================================================================}

Function TextJustificationFromString(Value: String): TTextJustification;
Begin
    Case Value Of
    'BottomLeft':   Result := eJustify_BottomLeft;
    'BottomCenter': Result := eJustify_BottomCenter;
    'BottomRight': Result := eJustify_BottomRight;
    'CenterLeft': Result := eJustify_CenterLeft;
    'Center': Result := eJustify_Center;
    'CenterRight': Result := eJustify_CenterRight;
    'TopLeft': Result := eJustify_TopLeft;
    'TopCenter': Result := eJustify_TopCenter;
    'TopRight': Result := eJustify_TopRight;
    Else Result := eJustify_Center;
    End;
End;

Function SY_GetFont(Height: Double, Angle: TRotationBy90): TFontID;
Var
    sz : Integer;
Begin
    sz := Round(Height / 10);
    Result := SchServer.FontManager.GetFontID(sz, Angle, False, False, False, False, 'Courier New');
End;

Function SY_GetAngle(Angle : String): TRotationBy90;
Begin
    Case Angle Of
    '90': Result := eRotate90;
    '180': Result := eRotate180;
    '270': Result := eRotate270;
    Else Result := eRotate0;
    End;
End;

Procedure SY_AddLine(sy: ISch_Component, Data: String);
Var
    lin : ISch_Line;
    s1, s2 : String;
Begin
    lin := SchServer.SchObjectFactory(eLine, eCreate_Default);
    If lin = Nil Then Exit;

    StrChop(GetBetween(Data, '(Start ', ')'), ',', s1, s2);
    lin.Location := Point(MilsToCoord(Evaluate(s1)), MilsToCoord(Evaluate(s2)));
    StrChop(GetBetween(Data, '(End ', ')'), ',', s1, s2);
    lin.Corner := Point(MilsToCoord(Evaluate(s1)), MilsToCoord(Evaluate(s2)));
    lin.LineWidth := eMedium; // NOTE: TODO:
    lin.LineStyle := eLineStyleSolid;
    lin.Color := $000000; // NOTE: TODO:
    lin.OwnerPartId := Evaluate(GetBetween(Data, '(Part ', ')'));
    lin.OwnerPartDisplayMode := sy.DisplayMode;
    sy.AddSchObject(lin);
    SchServer.RobotManager.SendMessage(sy.I_ObjectAddress, c_BroadCast, SCHM_PrimitiveRegistration, lin.I_ObjectAddress);
End;

Procedure SY_AddArc(sy: ISch_Component, Data: String);
Var
    arc : ISch_Arc;
    s1, s2 : String;
Begin
    arc := SchServer.SchObjectFactory(eArc, eCreate_Default);
    If arc = Nil Then Exit;
    StrChop(GetBetween(Data, '(Location ', ')'), ',', s1, s2);
    arc.Location := Point(MilsToCoord(Evaluate(s1)), MilsToCoord(Evaluate(s2)));
    arc.Radius := MilsToCoord(Evaluate(GetBetween(Data, '(Radius ', ')')));
    arc.LineWidth := eMedium; // NOTE: TODO:
    arc.Color := $000000; // NOTE: TODO:
    arc.StartAngle := Evaluate(GetBetween(Data, '(StartAngle ', ')'));
    arc.EndAngle := Evaluate(GetBetween(Data, '(EndAngle ', ')'));
    arc.OwnerPartId := Evaluate(GetBetween(Data, '(Part ', ')'));
    arc.OwnerPartDisplayMode := sy.DisplayMode;
    sy.AddSchObject(arc);
    SchServer.RobotManager.SendMessage(sy.I_ObjectAddress, c_BroadCast, SCHM_PrimitiveRegistration, arc.I_ObjectAddress);
End;

Procedure SY_AddPoly(sy: ISch_Component, Data: String, InFile: TextFile);
Var
    pol : ISch_Polygon;
    pc: Integer;
    s1, s2, inp, tag : String;
Begin
    pol := SchServer.SchObjectFactory(ePolygon, eCreate_Default);
    If pol = Nil Then Exit;

    pol.VerticesCount := Evaluate(GetBetween(Data, '(PointCount ', ')'));
    pc := 0;
    While Not EOF(InFile) Do Begin
        ReadLn(InFile, inp);
        If VarIsNull(inp) Then Continue;
        inp := Trim(inp);
        StrChop(inp, ' ', tag, inp);
        tag := Trim(tag);
        Case tag Of
        'Point': Begin
            pc := pc + 1;
            StrChop(GetBetween(inp, '(', ')'), ',', s1, s2);
            pol.Vertex[pc] := Point(MilsToCoord(Evaluate(s1)), MilsToCoord(Evaluate(s2)));
            End;
        'EndPolygon': Break;
        Else Begin
            ShowMessage('Keyword Error: ' + tag);
            End;
        End;
    End;
    pol.LineWidth := eZeroSize; // NOTE: TODO:
    pol.Color := $000000; // NOTE: TODO:
    pol.IsSolid := True;
    pol.OwnerPartId := Evaluate(GetBetween(Data, '(Part ', ')'));
    pol.OwnerPartDisplayMode := sy.DisplayMode;
    sy.AddSchObject(pol);
    SchServer.RobotManager.SendMessage(sy.I_ObjectAddress, c_BroadCast, SCHM_PrimitiveRegistration, pol.I_ObjectAddress);
End;

Procedure SY_AddText(sy: ISch_Component, Data: String);
Var
    txt : ISch_Label;
    s1, s2 : String;
Begin
    txt := SchServer.SchObjectFactory(eLabel, eCreate_Default);
    If txt = Nil Then Exit;
    StrChop(GetBetween(Data, '(Location ', ')'), ',', s1, s2);
    txt.Location := Point(MilsToCoord(Evaluate(s1)), MilsToCoord(Evaluate(s2)));
    If GetBetween(Data, '(Mirrored ', ')') = 'True' Then Begin
        txt.IsMirrored := True;
    End;
    txt.Orientation := SY_GetAngle(GetBetween(Data, '(Rotation ', ')'));
    txt.FontID := SY_GetFont(Evaluate(GetBetween(Data, 'Height ', ')')), txt.Orientation);
    txt.Justification := TextJustificationFromString(GetBetween(Data, '(Justification ', ')'));
    txt.Color := $000000; // NOTE: TODO:
    txt.Text := GetBetween(Data, '(Value "', '")');
    txt.OwnerPartId := Evaluate(GetBetween(Data, '(Part ', ')'));
    txt.OwnerPartDisplayMode := sy.DisplayMode;
    sy.AddSchObject(txt);
    SchServer.RobotManager.SendMessage(sy.I_ObjectAddress, c_BroadCast, SCHM_PrimitiveRegistration, txt.I_ObjectAddress);
End;

Procedure SY_AddParam(sy: ISch_Component, Data: String);
Var
    prm : ISch_Parameter;
    s1, s2 : String;
Begin
    prm := SchServer.SchObjectFactory(eParameter, eCreate_Default);
    If prm = Nil Then Exit;
    prm.Name := GetBetween(Data, '(Name "', '")');
    StrChop(GetBetween(Data, '(Location ', ')'), ',', s1, s2);
    prm.Location := Point(MilsToCoord(Evaluate(s1)), MilsToCoord(Evaluate(s2)));
    If GetBetween(Data, '(Mirrored ', ')') = 'True' Then Begin
        prm.IsMirrored := True;
    End;
    prm.Orientation := SY_GetAngle(GetBetween(Data, '(Rotation ', ')'));
    prm.FontID := SY_GetFont(Evaluate(GetBetween(Data, 'Height ', ')')), prm.Orientation);
    prm.Justification := TextJustificationFromString(GetBetween(Data, '(Justification ', ')'));
    prm.Color := $000000; // NOTE: TODO:
    prm.Text := GetBetween(Data, '(Value "', '")');
    prm.OwnerPartId := Evaluate(GetBetween(Data, '(Part ', ')'));
    prm.OwnerPartDisplayMode := sy.DisplayMode;
    sy.AddSchObject(prm);
    SchServer.RobotManager.SendMessage(sy.I_ObjectAddress, c_BroadCast, SCHM_PrimitiveRegistration, prm.I_ObjectAddress);
End;

Procedure SY_AddPin(sy: ISch_Component, Data: String);
Var
    pin : ISch_Pin;
    s1, s2 : String;
Begin
    pin := SchServer.SchObjectFactory(ePin, eCreate_Default);
    If pin = Nil Then Exit;

    // Define the pin parameters.
    StrChop(GetBetween(Data, '(Location ', ')'), ',', s1, s2);
    pin.Location := Point(MilsToCoord(Evaluate(s1)), MilsToCoord(Evaluate(s2)));
    pin.Color := $000000; // NOTE: TODO:
    pin.Orientation := SY_GetAngle(GetBetween(Data, '(Rotation ', ')'));
    Case GetBetween(Data, '(PinType ', ')') Of
    'IO': pin.Electrical := eElectricIO;
    'Input': pin.Electrical := eRotate180;
    'Output': pin.Electrical := eElectricOutput;
    'Passive': pin.Electrical := eElectricPassive;
    'OpenCollector': pin.Electrical := eElectricOpenCollector;
    'OpenEmitter': pin.Electrical := eElectricOpenEmitter;
    'HiZ': pin.Electrical := eElectricHiZ;
    'Power': pin.Electrical := eElectricPower;
    Else pin.Electrical := eElectricPassive;
    End;
    pin.PinLength := MilsToCoord(Evaluate(GetBetween(Data, '(Length ', ')')));
    pin.SwapId_Pin :=  GetBetween(Data, '(PinSwap ', ')');
    pin.SwapId_Part := GetBetween(Data, '(PartSwap ', ')');
    pin.SwapId_PartPin := GetBetween(Data, '(PinSeq ', ')');
    s1 := GetBetween(Data, '(Designator ', '")');
    pin.ShowDesignator := CheckLeft(s1, 'Visible');
    pin.Designator := RightOf(s1, '"');
    s1 := GetBetween(Data, '(Name ', '")');
    pin.ShowName := CheckLeft(s1, 'Visible');
    pin.Name := RightOf(s1, '"');
    pin.OwnerPartId := Evaluate(GetBetween(Data, '(Part ', ')'));

    pin.OwnerPartDisplayMode := sy.DisplayMode;
    sy.AddSchObject(pin);
    SchServer.RobotManager.SendMessage(sy.I_ObjectAddress, c_BroadCast, SCHM_PrimitiveRegistration, pin.I_ObjectAddress);
End;

Procedure ImportComponents(InFile: TextFile, Lib: ISch_Document, Errors: TStringList);
Var
    inp, tag, s, t : String;
    sy : ISch_Component;
    simp : ISch_Implementation;
Begin
    While Not EOF(InFile) Do Begin
        ReadLn(InFile, inp);
        If VarIsNull(inp) Then Continue;

        StrChop(inp, ' ', tag, inp);
        tag := Trim(tag);
        Case tag Of
        'Component': Begin
            // create a component reference
            sy := SchServer.SchObjectFactory(eSchComponent, eCreate_Default);
            If sy = Nil Then Begin
                Errors.Add('Error creating component.');
                Break;
            End;
            // Set up parameters for the library component.
            SchServer.ProcessControl.PreProcess(Lib, '');
            // Define the LibReference and add the component to the library.
            sy.LibReference := GetBetween(inp, '(Name "', '")');
            sy.Designator.Text := GetBetween(inp, '(DesPrefix "', '")');
            sy.ComponentDescription := 'Imported';
            sy.PartCount := Evaluate(GetBetween(inp, '(PartCount ', ')'));
            sy.CurrentPartId := 1;

            // add data to it
            While Not EOF(InFile) Do Begin
                ReadLn(InFile, inp);
                If VarIsNull(inp) Then Continue;
                StrChop(inp, ' ', tag, inp);
                Case tag Of
                'Parameter': Begin
                    SY_AddParam(sy, inp);
                    End;
                'Pin': Begin
                    SY_AddPin(sy, inp);
                    End;
                'Line': Begin
                    SY_AddLine(sy, inp);
                    End;
                'Arc': Begin
                    SY_AddArc(sy, inp);
                    End;
                'Polygon': Begin
                    SY_AddPoly(sy, inp, InFile);
                    End;
                'Text': Begin
                    SY_AddText(sy, inp);
                    End;
                'Footprint': Begin
                    simp := sy.AddSchImplementation();
                    simp.ModelName := GetBetween(inp, '(Name "', '")');
                    simp.ModelType := cDocKind_PcbLib;
                    simp.AddDataFileLink(simp.ModelName, '', cDocKind_PcbLib);
                    simp.MapAsString := GetBetween(inp, '(Map "', '")');
                    End;
                'EndComponent': Begin
                    Lib.AddSchComponent(sy);
                    // Send a system notification that a new component has been added to the library.
                    SchServer.RobotManager.SendMessage(Lib.I_ObjectAddress, c_BroadCast, SCHM_PrimitiveRegistration, sy.I_ObjectAddress);
                    Lib.CurrentSchComponent := sy;
                    Break;
                    End;
                '': Continue;
                Else Begin
                    ShowMessage('Keyword Error: ' + tag);
                    Break;
                    End;
                End;
            End; // while not eof()
            // done with component
            SchServer.ProcessControl.PostProcess(Lib, '');
            End;
        'EndComponents': Begin
            Break;
            End;
        '': Continue;
        Else Begin
            ShowMessage('Keyword Error: ' + tag);
            Break;
            End;
        End; // case tag
    End; // while not eof()
End;

{==============================================================================}
{====  Main Routines  =========================================================}
{==============================================================================}

Function InitLibDocs(BasePath: String,
    Out Proj : IProject,
    Out ProjDoc : IServerDocument,
    Out PcbLibDoc : IServerDocument,
    Out SchLibDoc : IServerDocument,
    Out pLib : IPCB_Library,
    Out sLib : ISch_Document): Boolean;
Var
    WorkSpace : IWorkSpace;
Begin
    Result := False;
    WorkSpace := GetWorkSpace;
    If WorkSpace = Nil Then Begin
        ShowMessage('Nil WorkSpace');
        Exit;
    End;
    // Integrated library, and the project it creates
    ProjDoc := Client.OpenNewDocument(cDocKind_IntegratedLibrary, 'UL_Imported_Lib', 'UL_Imported_Lib', False);
    If ProjDoc = Nil Then Begin
        ShowMessage('Nil ProjDoc');
        Exit;
    End;
    If Not ProjDoc.DoSafeChangeFileNameAndSave(BasePath + '.LibPkg', cDocKind_IntegratedLibrary) Then Begin
        ShowMessage('ProjDoc Save failed');
        Exit;
    End;
    Proj := WorkSpace.DM_GetProjectFromPath(BasePath + '.LibPkg');
    If Proj = Nil Then Begin
        ShowMessage('Nil Proj');
        Exit;
    End;
    // Footprint library
    PcbLibDoc := Client.OpenNewDocument(cDocKind_PcbLib, 'UL_Footprints', 'UL_Footprints', False);
    If PcbLibDoc = Nil Then Begin
        ShowMessage('Nil PcbLibDoc');
        Exit;
    End;
    If Not PcbLibDoc.DoSafeChangeFileNameAndSave(BasePath + '.PcbLib', cDocKind_PcbLib) Then Begin
        ShowMessage('PcbLibDoc Save failed');
        Exit;
    End;
    Proj.DM_AddSourceDocument(BasePath + '.PcbLib');
    pLib := PCBServer.GetPCBLibraryByPath(BasePath + '.PcbLib');
    If pLib = Nil Then Begin
        ShowMessage('Nil pLib');
        Exit;
    End;
    // Symbol Library
    SchLibDoc := Client.OpenNewDocument(cDocKind_SchLib, 'UL_Components', 'UL_Components', False);
    If SchLibDoc = Nil Then Begin
        ShowMessage('Nil SchLibDoc');
        Exit;
    End;
    If Not SchLibDoc.DoSafeChangeFileNameAndSave(BasePath + '.SchLib', cDocKind_SchLib) Then Begin
        ShowMessage('SchLibDoc Save failed');
        Exit;
    End;
    Proj.DM_AddSourceDocument(BasePath + '.SchLib');
    sLib := SchServer.GetSchDocumentByPath(BasePath + '.SchLib');
    If sLib = Nil Then Begin
        ShowMessage('Nil sLib');
        Exit;
    End;
    // Done
    Result := True;
End;

Procedure ImportAscIIData(InFileName : String);
Var
    WorkSpace : IWorkSpace;
    dProj : IProject;

    Proj : IProject;
    ProjDoc : IServerDocument;
    PcbLibDoc : IServerDocument;
    SchLibDoc : IServerDocument;
    pLib : IPCB_Library;
    sLib : ISch_Document;

    DefFP : IPCB_Component; // default initial blank footprint
    DefSY : ISch_Component; // default initial blank symbol

    SavePath: String;

    InFile : TextFile;
    Errors : TStringList;
    inp, tag : String;
Begin
    SavePath := LeftOf(InFileName, '.');
    Errors := TStringList.Create();

    WorkSpace := GetWorkSpace;
    If WorkSpace = Nil Then Begin
        ShowMessage('Nil WorkSpace');
        Exit;
    End;
    dProj := WorkSpace.DM_FocusedProject();

    // create integerated library documents
    If InitLibDocs(SavePath, Proj, ProjDoc, PcbLibDoc, SchLibDoc, pLib, sLib) = False Then Begin
        ShowMessage('Error initializing library');
        Exit;
    End;
    Proj.DM_SetAsCurrentProject();

    // get the original blank footprint for later deletion when we are done
    DefFP := pLib.CurrentComponent;
    // get the original blank symbol for later deletion when we are done
    DefSy := sLib.CurrentSchComponent;

    // start importing data
    AssignFile(InFile, InFileName);
    Reset(InFile);

    While Not EOF(InFile) Do Begin
        ReadLn(InFile, inp);
        If VarIsNull(inp) Then Continue;

        StrChop(inp, ' ', tag, inp);
        tag := Trim(tag);
        Case tag Of
        'StartFootprints': Begin
            ImportFootprints(InFile, pLib, Errors);
            End;
        'StartComponents': Begin
            ImportComponents(InFile, sLib, Errors);
            End;
        '': Continue;
        End;
    End;
    CloseFile(InFile);

    // delete the original default blank footprint
    If Not VarIsNull(DefFP) Then Begin
        pLib.DeRegisterComponent(DefFP);
        pLib.RemoveComponent(DefFP);
    End Else Begin
        ShowMessage('DefFP was Nil');
    End;
    // delete the original default blank symbol
    // NOTE: TODO: looks broken; does nothing noticable
    If Not VarIsNull(DefSY) Then Begin
        //ShowMessage('trying to delete DefSym "' + DefSy.LibReference + '"');
        sLib.UnRegisterSchObjectFromContainer(DefSY);
        sLib.RemoveSchObject(DefSy);
        //DefSY.Container.RemoveSchObject(DefSy);
    End Else Begin
        ShowMessage('DefSym was Nil');
    End;

    // update views?
    pLib.Board.ViewManager_FullUpdate();
    // Refresh symbol library.
    sLib.GraphicallyInvalidate();

    // save files again
    ProjDoc.DoFileSave(cDocKind_IntegratedLibrary);
    PcbLibDoc.DoFileSave(cDocKind_PcbLib);
    SchLibDoc.DoFileSave(cDocKind_SchLib);

    // set the original project back to its focus
    If dProj <> Nil Then Begin
        dProj.DM_SetAsCurrentProject();
    End;

    ShowMessage('Done with "' + SavePath + '"');
End;

