/** * These arguments were used when this file was generated. They will be automatically applied on subsequent loads * via the GUI or CLI. Run CLI with '--help' for additional information on how to override these arguments. * @cliArgs --board "/ti/boards/CC1352P_2_LAUNCHXL" --device "CC1352P1F3RGZ" --part "Default" --package "RGZ" --rtos "tirtos7" --product "simplelink_cc13xx_cc26xx_sdk@8.31.00.11" * @v2CliArgs --board "/ti/boards/CC1352P_2_LAUNCHXL" --device "CC1352P" --package "VQFN (RGZ)" --rtos "tirtos7" --product "simplelink_cc13xx_cc26xx_sdk@8.31.00.11" * @versions {"tool":"1.25.0+4268"} */ /** * Import the modules used in this configuration. */ const CCFG = scripting.addModule("/ti/devices/CCFG"); const rfdesign = scripting.addModule("/ti/devices/radioconfig/rfdesign"); const AESCBC = scripting.addModule("/ti/drivers/AESCBC"); const AESCBC1 = AESCBC.addInstance(); const AESCCM = scripting.addModule("/ti/drivers/AESCCM"); const AESCCM1 = AESCCM.addInstance(); const AESECB = scripting.addModule("/ti/drivers/AESECB"); const AESECB1 = AESECB.addInstance(); const DMA = scripting.addModule("/ti/drivers/DMA"); const ECDH = scripting.addModule("/ti/drivers/ECDH"); const ECDH1 = ECDH.addInstance(); const ECDSA = scripting.addModule("/ti/drivers/ECDSA"); const ECDSA1 = ECDSA.addInstance(); const NVS = scripting.addModule("/ti/drivers/NVS"); const NVS1 = NVS.addInstance(); const NVS2 = NVS.addInstance(); const Power = scripting.addModule("/ti/drivers/Power"); const RF = scripting.addModule("/ti/drivers/RF"); const SHA2 = scripting.addModule("/ti/drivers/SHA2"); const SHA21 = SHA2.addInstance(); const TRNG = scripting.addModule("/ti/drivers/TRNG"); const TRNG1 = TRNG.addInstance(); const UART2 = scripting.addModule("/ti/drivers/UART2", {}, false); const UART21 = UART2.addInstance(); const Button = scripting.addModule("/ti/drivers/apps/Button"); const Button1 = Button.addInstance(); const Button2 = Button.addInstance(); const LED = scripting.addModule("/ti/drivers/apps/LED"); const LED1 = LED.addInstance(); const LED2 = LED.addInstance(); const Settings = scripting.addModule("/ti/posix/tirtos/Settings"); const BIOS = scripting.addModule("/ti/sysbios/BIOS"); const Boot = scripting.addModule("/ti/sysbios/family/arm/cc26xx/Boot"); const GateMutexPri = scripting.addModule("/ti/sysbios/gates/GateMutexPri"); const HeapCallback = scripting.addModule("/ti/sysbios/heaps/HeapCallback"); const Clock = scripting.addModule("/ti/sysbios/knl/Clock"); const Idle = scripting.addModule("/ti/sysbios/knl/Idle"); const Idle2 = Idle.addInstance(); const Semaphore = scripting.addModule("/ti/sysbios/knl/Semaphore"); const Swi = scripting.addModule("/ti/sysbios/knl/Swi"); const Task = scripting.addModule("/ti/sysbios/knl/Task"); const Error = scripting.addModule("/ti/sysbios/runtime/Error"); const Memory = scripting.addModule("/ti/sysbios/runtime/Memory"); const SysCallback = scripting.addModule("/ti/sysbios/runtime/SysCallback"); const System = scripting.addModule("/ti/sysbios/runtime/System"); const zstack = scripting.addModule("/ti/zstack/zstack"); /** * Write custom configuration values to the imported modules. */ CCFG.xoscCapArray = true; CCFG.xoscCapArrayDelta = 0xC1; CCFG.enableBootloader = true; CCFG.enableBootloaderBackdoor = true; CCFG.dioBootloaderBackdoor = 15; CCFG.levelBootloaderBackdoor = "Active low"; CCFG.forceVddr = true; CCFG.ccfgTemplate.$name = "ti_devices_CCFG_CCFGCC26XXTemplate0"; rfdesign.rfDesign = "LAUNCHXL-CC1352P-2"; rfdesign.fbSub1g = "none"; AESCBC1.$name = "CONFIG_AESCBC_0"; AESCCM1.$name = "CONFIG_AESCCM_0"; AESCCM1.interruptPriority = "2"; AESECB1.$name = "CONFIG_AESECB_0"; AESECB1.interruptPriority = "1"; ECDH1.$name = "CONFIG_ECDH_0"; ECDSA1.$name = "CONFIG_ECDSA_0"; NVS1.$name = "CONFIG_NVSINTERNAL"; NVS1.internalFlash.$name = "ti_drivers_nvs_NVSCC26XX0"; NVS1.internalFlash.regionSize = 0x4000; NVS1.internalFlash.regionBase = 0x52000; NVS2.$name = "CONFIG_NVSEXTERNAL"; NVS2.nvsType = "External"; NVS2.$hardware = system.deviceData.board.components.MX25R8035F; NVS2.externalFlash.$name = "ti_drivers_nvs_NVSSPI25X0"; NVS2.externalFlash.regionSize = 0x256000; NVS2.externalFlash.verifyBufferSize = 64; scripting.suppress("The board \'CC1352P-2 LaunchPad\' requires the \'RF Antenna Switch\' to be selected\\.", RF, "$hardware"); SHA21.$name = "CONFIG_SHA2_0"; TRNG1.$name = "CONFIG_TRNG_0"; UART21.$name = "CONFIG_DISPLAY_UART"; UART21.rxRingBufferSize = 128; UART21.txRingBufferSize = 128; UART21.interruptPriority = "5"; UART21.uart.txPin.$assign = "boosterpack.36"; UART21.uart.rxPin.$assign = "boosterpack.19"; Button1.$name = "CONFIG_BTN_LEFT"; Button1.$hardware = system.deviceData.board.components["BTN-1"]; Button1.gpioPin.$name = "CONFIG_GPIO_BTN1"; Button1.gpioPin.pull = "Pull Up"; Button2.$name = "CONFIG_BTN_RIGHT"; Button2.$hardware = system.deviceData.board.components["BTN-2"]; Button2.gpioPin.$name = "CONFIG_GPIO_BTN2"; Button2.gpioPin.pull = "Pull Up"; LED1.$name = "CONFIG_LED_RED"; LED1.$hardware = system.deviceData.board.components.LED_RED; LED1.gpioPin.$name = "CONFIG_GPIO_RLED"; LED2.$name = "CONFIG_LED_GREEN"; LED2.$hardware = system.deviceData.board.components.LED_GREEN; LED2.gpioPin.$name = "CONFIG_GPIO_GLED"; const NVSSPI25XDevice = scripting.addModule("/ti/drivers/nvs/NVSSPI25XDevice", {}, false); const NVSSPI25XDevice1 = NVSSPI25XDevice.addInstance({}, false); NVSSPI25XDevice1.$name = "CONFIG_NVS_SPI_0"; NVS2.externalFlash.spiFlashDevice = NVSSPI25XDevice1; NVSSPI25XDevice1.chipSelectPinInstance.$name = "CONFIG_GPIO_0"; const SPI = scripting.addModule("/ti/drivers/SPI", {}, false); const SPI1 = SPI.addInstance({}, false); SPI1.$name = "CONFIG_SPI_0"; NVSSPI25XDevice1.sharedSpiInstance = SPI1; SPI1.sclkPinInstance.$name = "CONFIG_PIN_SPI_SCLK"; SPI1.pociPinInstance.$name = "CONFIG_PIN_SPI_MISO"; SPI1.picoPinInstance.$name = "CONFIG_PIN_SPI_MOSI"; BIOS.assertsEnabled = false; BIOS.rtsGateType = "BIOS_GateMutexPri"; BIOS.heapSize = 0x00000000; BIOS.heapType = "HeapCallback"; const Hwi = scripting.addModule("/ti/sysbios/family/arm/m3/Hwi", {}, false); Hwi.nvicCCR = []; HeapCallback.initFxn = "osalHeapInitFxn"; HeapCallback.allocInstFxn = "osalHeapAllocFxn"; HeapCallback.freeInstFxn = "osalHeapFreeFxn"; HeapCallback.getStatsInstFxn = "osalHeapGetStatsFxn"; HeapCallback.isBlockingInstFxn = "osalHeapIsBlockingFxn"; Clock.tickPeriod = 10; Clock.swiPriority = 4; const Timer = scripting.addModule("/ti/sysbios/family/arm/cc26xx/Timer", {}, false); Idle2.$name = "powerIdle"; Idle2.idleFxn = "Power_idleFunc"; Semaphore.supportsPriority = false; Swi.numPriorities = 6; Task.checkStackFlag = false; Task.defaultStackSize = 512; Task.idleTaskStackSize = 512; Task.numPriorities = 6; Error.policy = "Error_SPIN"; System.abortFxn = "System_abortSpin"; System.exitFxn = "System_exitSpin"; System.maxAtexitHandlers = 1; System.supportModule = "SysCallback"; zstack.deviceType = "zed"; zstack.deviceTypeReadOnly = true; zstack.touchlink.$name = "ti_zstack_touchlink_zstack_touchlink0"; zstack.pm.$name = "ti_zstack_pm_zstack_pm0"; zstack.rf.$name = "ti_zstack_rf_zstack_rf0"; zstack.rf.txPower = "14"; zstack.rf.primaryChannels = [11,15]; zstack.rf.secondaryChannels = [11,15]; zstack.rf.radioConfig.$name = "ti_devices_radioconfig_settings_ieee_15_40"; zstack.rf.radioConfig.codeExportConfig.$name = "ti_devices_radioconfig_code_export_param0"; zstack.rf.coexSettings.$name = "ti_zstack_rf_zstack_coex_mod0"; zstack.network.$name = "ti_zstack_network_zstack_network0"; zstack.network.panID = "0x1234"; zstack.advanced.$name = "ti_zstack_advanced_zstack_advanced0"; zstack.advanced.routing.$name = "ti_zstack_advanced_zstack_routing0"; zstack.advanced.packetSending.$name = "ti_zstack_advanced_zstack_packet_sending0"; zstack.advanced.packetSending.apscMaxFrameRetries = 4; zstack.advanced.packetSending.nwkDataRetries = 3; zstack.advanced.packetSending.macFrameRetries = 5; zstack.advanced.tableSize.$name = "ti_zstack_advanced_zstack_table_size0"; /** * Pinmux solution for unlocked pins/peripherals. This ensures that minor changes to the automatic solver in a future * version of the tool will not impact the pinmux you originally saw. These lines can be completely deleted in order to * re-solve from scratch. */ UART21.uart.$suggestSolution = "UART1"; Button1.button.$suggestSolution = "boosterpack.13"; Button2.button.$suggestSolution = "boosterpack.8"; LED1.ledPin.$suggestSolution = "boosterpack.39"; LED2.ledPin.$suggestSolution = "boosterpack.40"; NVSSPI25XDevice1.chipSelect.$suggestSolution = "boosterpack.38"; SPI1.spi.$suggestSolution = "SSI0"; SPI1.spi.sclkPin.$suggestSolution = "boosterpack.7"; SPI1.spi.pociPin.$suggestSolution = "boosterpack.14"; SPI1.spi.picoPin.$suggestSolution = "boosterpack.15"; SPI1.spi.dmaRxChannel.$suggestSolution = "DMA_CH3"; SPI1.spi.dmaTxChannel.$suggestSolution = "DMA_CH4"; Timer.rtc.$suggestSolution = "RTC0";