输入电压在-3到3v之间,经过运放供给DSPADC模块,我的想法是输入电压经过电压跟随有源滤波后,再利用差分放大电路,5v或3.3v供电,uo=1/2*(3.3-uin),不知道此方案可不可行,求大神指点
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
输入电压在-3到3v之间,经过运放供给DSPADC模块,我的想法是输入电压经过电压跟随有源滤波后,再利用差分放大电路,5v或3.3v供电,uo=1/2*(3.3-uin),不知道此方案可不可行,求大神指点
可行,只是注意差分运放的话,如果3.3V供电,那么把Vin+接3.3V,需要查一下是否输入允许达到电源轨。