This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

求助:使用仪表放大器INA333采集压电传感器信号出现类似运放阻塞的问题

Other Parts Discussed in Thread: INA333

附件电路用于采集压电传感器信号,用手轻轻按压传感器使信号削顶,几秒后松开传感器并保证传感器不受任何外力,传感器信号立刻变为削底并有不规则抖动。

传感器不施加外力时,正常信号应该是0.5VCC。出现削底后,信号无法自动恢复0.5VCC,需敲击传感器提供一个大信号,或对INA333重新上电,可恢复正常信号。

希望TI的工程师可以帮忙分析下INA333在使用中可能存在的问题,谢谢!