This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Bq40z50-R1 OC置位,电压到达不了4.2

Other Parts Discussed in Thread: BQ40Z50-R1

各位工程师您好,我用Bq40z50-R1做电池保护板进行电芯管理。现在测试的过程中发现一个问题。我是7000mAh的电池,等初始参数以及ChemID设定之后,在充电过程中老是出现Remaining Capacity>Full charge Capacity,导致OC置1的现象,而此时的电池电压仅有4.0+或4.1左右,达不到4.2。有时候多经过几个重放的过程,这种现象就没有了。附件有我充电的数据,请帮忙看一下。这种性质不能用于大规模生产的呀,谢谢

BAT5-LearnCyc1-Charge.xlsx