This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
D5 不亮说明PLL1没有锁存。
您是参考的EVM user's guide中的步骤吗?按照那个步骤,到哪步发生了如上error?
先用EVM上的reset或者Power down命令控制一下EVM,看看电流有没有变化。以确定连接上了没有
看报错情况像是需要update USN2ANY的firmware。
按照这个帖子上的步骤 更新一下,试试能否解决您的问题。
https://e2e.ti.com/support/clocks/f/48/t/366660?tisearch=e2e-quicksearch&keymatch=USB2ANY%20firmware
如还未解决,请反馈
https://e2e.ti.com/support/clocks/f/48/t/366660?tisearch=e2e-quicksearch&keymatch=USB2ANY%20firmware
没有有效的信息。
这个链接里附件信息是USB2ANY的GUI安装文件,以及Firmware,版本为2.6.1.0的。
你的EVM板应该是新的。里面的USB2ANY需要reset一下。你有没有按照屏幕的提示,先拔下usb线,然后reset一下,然后等等的流程