• 状态
  • 个回复 10 个回复
  • 名订阅用户 12 名订阅用户
  • 次查看 2892 次查看
  • 用户 0 名在线用户
选项
选项
相关

AWR1243+DCA1000EVM 无法获得数据（网络连接及其他配置正常）

user5792212
Prodigy 70 points

您好！ 我按照DCA1000_Quick_Start_Guide 跑示例，SPI及网卡连接均正常，但是在trigger frame后 很快返回 Frame end， 最后也没有获得数据（wiresharp监测不到返回的数据包）， 运行结果下：

使用的软硬件版本

1243EVM ES2.0

MMWAVE STUDIO Release 01.00.00

希望能够获得解答。

感谢

  • 0
    TI__Mastermind 20485 points
    你好，
    是否有查看视频？
    training.ti.com/dca1000-training-video
    对比一下操作哪一步会有失败。
  • 0 回复 Wesley He
    Prodigy 70 points

    您好！ 按照视频的步骤，最后一步 trigger frame 后，没有数据，post processing 按钮也无法点击

  • 0 回复 user5792212
    TI__Mastermind 20485 points
    你好，
    能否贴出全部的output信息，帮助定位问题。谢谢
  • 0 回复 Wesley He
    Prodigy 70 points

    全部信息如下：  麻烦了！

    GM: Constructor

    GM: Sat Jan 05 19:54:16 2019

    RSTD.Transmit("/Settings")

    [19:54:16]

    [19:54:16] ### Running Startup script: "C:\ti\mmwave_studio_01_00_00_00\mmWaveStudio\Scripts\Startup.lua" ###

    [19:54:16] RSTD.SetAndTransmit ("/Settings/Scripter/Display DateTime" , "1")

    [19:54:16] RSTD.SetAndTransmit ("/Settings/Scripter/DateTime Format" , "HH:mm:ss")

    [19:54:16] Scripter ignored: Attempt to UnBuild() again or before Build.

    [19:54:16] RSTD.SetVar ("/Settings/Clients/Client 0/Dll" , "C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\Clients\\\\LabClient.dll")

    [19:54:16] RSTD.SetVar ("/Settings/Clients/Client 0/Use" , "TRUE")

    [19:54:16] RSTD.SetVar ("/Settings/Clients/Client 1/Use" , "FALSE")

    [19:54:16] RSTD.SetVar ("/Settings/Clients/Client 2/Use" , "FALSE")

    [19:54:16] RSTD.SetVar ("/Settings/Clients/Client 3/Use" , "FALSE")

    [19:54:16] RSTD.SetVar ("/Settings/Clients/Client 4/Use" , "FALSE")

    [19:54:16] RSTD.SetVar ("/Settings/AL Client/AL Dll" , "C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\RunTime\\SAL.dll")

    [19:54:16] RSTD.SetVar ("/Settings/Clients/Client 0/GuiDll" , "")

    [19:54:16] RSTD.SetVar ("/Settings/AutoUpdate/Enabled" , "TRUE")

    [19:54:16] RSTD.SetVar ("/Settings/AutoUpdate/Interval" , "1")

    [19:54:16] RSTD.SetVar ("/Settings/Monitors/UpdateDisplay" , "TRUE")

    [19:54:16] RSTD.SetVar ("/Settings/Monitors/OneClickStart" , "TRUE")

    [19:54:16] RSTD.SetVar ("/Settings/Automation/Automation Mode" , "false")

    [19:54:16] RSTD.Transmit("/")

    [19:54:16] RSTD.SaveSettings(): Settings saved to "C:\Users\admin\AppData\Roaming\RSTD\config.xml"

    [19:54:16] RSTD.Build()

    [19:54:16] RSTD.SaveSettings(): Settings saved to "C:\Users\admin\AppData\Roaming\RSTD\config.xml"

    [19:54:16] RSTD.Transmit("/")

    [19:54:16] RSTD.AL_Build()

    [19:54:16] RSTD.AL_LoadXml()

    [19:54:16] RSTD.Transmit("/")

    [19:54:16] RSTD.AL_Init()

    [19:54:16] RSTD.Clients_Build()

    [19:54:16] GM: Init

    [19:54:16] GM: Loaded 'C:\ti\mmwave_studio_01_00_00_00\mmWaveStudio\Clients\\LabClient.dll'

    [19:54:16] GM: 1 Guest (s) init

    [19:54:16] GM: 1 Module(s) init

    [19:54:16] GM: 2 Tab   (s) init

    [19:54:16] RSTD.Client_LoadXml()

    [19:54:16] [RadarAPI]: Starting Matlab Engine..

    [19:54:18] [RadarAPI]: Matlab Engine Started!

    [19:54:21] [RadarAPI]: ar1.LoadSettings('C:\Users\admin\AppData\Roaming\RSTD\ar1gui.ini')

    [19:54:21] TESTING = false

    [19:54:21]

    [19:54:21] ***Script completed successfully.***

    [19:54:24] [RadarAPI]: Opening Gpio Control Port()

    [19:54:24] [RadarAPI]: Status: Passed

    [19:54:24] [RadarAPI]: Opening Board Control Port()

    [19:54:24] [RadarAPI]: Status: Passed

    [19:54:25] [RadarAPI]: ar1.FullReset()

    [19:54:25] [RadarAPI]: Status: Passed

    [19:54:26] [RadarAPI]: Closing Board Control Port()

    [19:54:26] [RadarAPI]: Status: Passed

    [19:54:26] [RadarAPI]: Closing Gpio Control Port()

    [19:54:26] [RadarAPI]: Status: Passed

    [19:54:26] [RadarAPI]: ar1.SOPControl(2)

    [19:54:26] [RadarAPI]: Status: Passed

    [19:54:27] [RadarAPI]: ar1.Connect(6,921600,1000)

    [19:54:29] [RadarAPI]: Warning: Connected with baudrate 115200

    [19:54:30] [RadarAPI]: Warning: Disconnected existing BaudRate

    [19:54:30] [RadarAPI]: Warning: Trying to connect with baudrate 921600

    [19:54:32] [RadarAPI]: ar1.Calling_IsConnected()

    [19:54:33] [RadarAPI]: ar1.SelectChipVersion("XWR1243")

    [19:54:33] [RadarAPI]: Status: Passed

    [19:54:34] [RadarAPI]: ar1.SelectChipVersion("XWR1243")

    [19:54:34] [RadarAPI]: Status: Passed

    [19:54:34] [RadarAPI]: ar1.SaveSettings('C:\Users\admin\AppData\Roaming\RSTD\ar1gui.ini')

    [19:54:39] [RadarAPI]: ar1.ReadRegister(0xffffe210, 0, 31)

    [19:54:39] [RadarAPI]: Value : 100000

    [19:54:39] [RadarAPI]: ar1.ReadRegister(0xffffe218, 0, 31)

    [19:54:39] [RadarAPI]: Value : 12

    [19:54:39] [RadarAPI]: ar1.DownloadBSSFw("C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\Scripts\\..\\..\\rf_eval_firmware\\radarss\\xwr12xx_xwr14xx_radarss_ES2.0.bin")

    [19:54:39] [RadarAPI]: Downloading BSS ROM Legacy Binary..

    [19:54:45] BSS FW Download Success

    [19:54:47] [RadarAPI]: ar1.DownloadMSSFw("C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\Scripts\\..\\..\\rf_eval_firmware\\masterss\\xwr12xx_xwr14xx_masterss_ES2.0.bin")

    [19:54:47] [RadarAPI]: Downloading MSS Legacy Binary..

    [19:54:50] MSS FW Download Success

    [19:54:53] [RadarAPI]: ar1.PowerOn(0, 1000, 0, 0)

    [19:54:53] [RadarAPI]: Status: Passed

    [19:54:53] MSS power up done async event received!

    [19:54:53] [RadarAPI]: ar1.SaveSettings('C:\Users\admin\AppData\Roaming\RSTD\ar1gui.ini')

    [19:54:53] Power On Success

    [19:54:54] BSS power up done async event received!

    [19:54:54] [RadarAPI]: ar1.RfEnable()

    [19:54:54] [RadarAPI]: Status: Passed

    [19:54:55] RF Enable Success

    [19:54:56] [RadarAPI]: ar1.ChanNAdcConfig(1, 1, 0, 1, 1, 1, 1, 2, 1, 0)

    [19:54:56] [RadarAPI]: Status: Passed

    [19:54:56] ChanNAdcConfig Success

    [19:54:57] [RadarAPI]: ar1.LPModConfig(0, 0)

    [19:54:57] [RadarAPI]: Status: Passed

    [19:54:57] Regualar mode Cfg Success

    [19:54:59] [RadarAPI]: ar1.RfInit()

    [19:54:59] RF Init async event received!

    [19:55:00] [RadarAPI]: Time stamp, Temperture: 5616,33; APLL Status, Update: 1, 0; SynthVCO1 Status, Update: 1, 1; SynthVCO2 Status, Update: 1, 1; LODist Status, Update: 1, 1; RxADCDC Status, Update: 1, 1; HPFcutoff Status, Update: 1, 1; LPFcutoff Status, Update: 1, 1; PeakDetector Status, Update: 1, 1; TxPower Status, Update: 1, 1; RxGain Status, Update: 1, 1; RxIQMM Status, Update: 1, 1;

    [19:55:00] [RadarAPI]: Status: Passed

    [19:55:00] RfInit Success

    [19:55:01] [RadarAPI]: ar1.DataPathConfig(1, 1, 0)

    [19:55:01] [RadarAPI]: Status: Passed

    [19:55:01] DataPathConfig Success

    [19:55:02] [RadarAPI]: ar1.LvdsClkConfig(1, 1)

    [19:55:02] [RadarAPI]: Status: Passed

    [19:55:02] LvdsClkConfig Success

    [19:55:03] [RadarAPI]: ar1.LVDSLaneConfig(0, 1, 1, 1, 1, 1, 0, 0)

    [19:55:03] [RadarAPI]: Status: Passed

    [19:55:03] LVDSLaneConfig Success

    [19:55:04] [RadarAPI]: ar1.ProfileConfig(0, 77, 100, 6, 60, 0, 0, 0, 0, 0, 0, 29.982, 0, 256, 10000, 0, 0, 30)

    [19:55:04] [RadarAPI]: Status: Passed

    [19:55:04] ProfileConfig Success

    [19:55:05] [RadarAPI]: ar1.ChirpConfig(0, 0, 0, 0, 0, 0, 0, 1, 1, 0)

    [19:55:05] [RadarAPI]: Status: Passed

    [19:55:05] ChirpConfig Success

    [19:55:06] [RadarAPI]: ar1.DisableTestSource(0)

    [19:55:06] [RadarAPI]: Status: Passed

    [19:55:06] [RadarAPI]: ar1.FrameConfig(0, 0, 8, 128, 40, 0, 1)

    [19:55:06] [RadarAPI]: Status: Passed

    [19:55:06] FrameConfig Success

    [19:55:07] [RadarAPI]: ar1.SelectCaptureDevice("DCA1000")

    [19:55:07] [RadarAPI]: passed

    [19:55:07] SelectCaptureDevice Success

    [19:55:08] [RadarAPI]: StatusDCCard Event Registered

    [19:55:08] [RadarAPI]: Status: Passed

    [19:55:08] [RadarAPI]: ar1.CaptureCardConfig_EthInit("192.168.33.30", "192.168.33.180", "12:34:56:78:90:12", 4096, 4098)

    [19:55:08] [RadarAPI]: Status: Passed

    [19:55:08] [RadarAPI]: SYSTEM_CONNECT_CMD_CODE Async event recieved(9)

    [19:55:09] [RadarAPI]: ConnectRFDCCard Status: Passed

    [19:55:09] [RadarAPI]: Status: Passed

    [19:55:09] [RadarAPI]: READ_FPGA_VERSION_CMD_CODE event recieved(14)

    [19:55:09] [RadarAPI]: Status: Passed

    [19:55:09] CaptureCardConfig_EthInit Success

    [19:55:10] [RadarAPI]: ar1.ConfigureRFDCCardMode(1, 1, 1, 2, 3, 0)

    [19:55:10] [RadarAPI]: Status: Passed

    [19:55:10] [RadarAPI]: CONFIG_FPGA_GEN_CMD_CODE Async event recieved(3)

    [19:55:10] CaptureCardConfig_Mode Success

    [19:55:11] [RadarAPI]: ar1.CaptureCardConfig_PacketDelay(25)

    [19:55:11] [RadarAPI]: Status: Passed

    [19:55:11] [RadarAPI]: CONFIG_PACKET_DATA_CMD_CODE Async event recieved(11)

    [19:55:11] CaptureCardConfig_PacketDelay Success

    [19:55:12] [RadarAPI]: ar1.CaptureCardConfig_StartRecord("C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\Scripts\\..\\PostProc\\adc_data.bin", 1)

    [19:55:12] [RadarAPI]: Status: Passed

    [19:55:12] [RadarAPI]: RECORD_START_CMD_CODE Async event recieved(5)

    [19:55:13] [RadarAPI]: ar1.StartFrame()

    [19:55:13] [RadarAPI]: Status: Passed

    [19:55:13] Frame start async event received!

    [19:55:13] [RadarAPI]: Frame Ended

    [19:55:13] Frame End async event received!

    [19:55:15] Please wait for a few seconds for Packet reorder utility processing .....!!!!

    [19:55:15] [RadarAPI]: Packet Reorder Utility Started...please wait...

    [19:55:15] [RadarAPI]: ar1.PacketReorderZeroFill("C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\Scripts\\..\\PostProc\\adc_data_Raw_0.bin", "C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\Scripts\\..\\PostProc\\adc_data.bin", "C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\Scripts\\..\\PostProc\\pktlogfile.txt")

    [19:55:20] [RadarAPI]: Packet Reorder Utility process completed!

    [19:55:30] Packet reorder utility processing done.....!!!!

    [19:55:30] Please wait for a few seconds for matlab post processing .....!!!!

    [19:55:30] [RadarAPI]: ar1.StartMatlabPostProc("C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\Scripts\\..\\PostProc\\adc_data.bin")

    [19:55:30] [RadarAPI]: Error:

    [19:55:30]

    [19:55:30] ... MWMCR::EvaluateFunction error ...

    [19:55:30] 05-Jan-2019 19:55:30: The file C:\ti\mmwave_studio_01_00_00_00\mmWaveStudio\Scripts\..\PostProc\adc_data.bin is empty. Please capture more data.,1,

    [19:55:30] Error in => process_adc_data.m at line 52.

    [19:55:30]

    [19:55:30] ... Matlab M-code Stack Trace ...

    [19:55:30]     at

    [19:55:30] file C:\Users\admin\AppData\Local\Temp\admin\mcrCache8.5.1\Matlab0\Logging\log_status.m, name log_status, line 32.

    [19:55:30]     at

    [19:55:30] file C:\Users\admin\AppData\Local\Temp\admin\mcrCache8.5.1\Matlab0\Processing_functions\read_adc_data.m, name read_adc_data, line 28.

    [19:55:30]     at

    [19:55:30] file C:\Users\admin\AppData\Local\Temp\admin\mcrCache8.5.1\Matlab0\MatlabPostPr\process_adc_data.m, name process_adc_data, line 52.

    [19:55:30]

    [19:55:30]

    [19:55:30] Trace:

    [19:55:30]     在 MathWorks.MATLAB.NET.Utility.MWMCR.EvaluateFunction(String functionName, Int32 numArgsOut, Int32 numArgsIn, MWArray[] argsIn)

    [19:55:30]     在 MathWorks.MATLAB.NET.Utility.MWMCR.EvaluateFunction(Int32 numArgsOut, String functionName, MWArray[] argsIn)

    [19:55:30]     在 MatlabPostProcGui.MatlabPostProcGUIClass.process_adc_data(MWArray adc_file_name, MWArray force_cont_stream_mode)

    [19:55:30]     在 AR1xController.frmAR1Main.iStartMtlabPostProc()

    [19:55:40]

    [19:55:40] ***Script completed successfully.***

  • 0 回复 user5792212
    TI__Mastermind 20485 points
    你好，
    看了你的log，采集应该成功了，能否检查一下BIN文件的尺寸？以下两个文件。
    "C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\Scripts\\..\\PostProc\\adc_data_Raw_0.bin", "C:\\ti\\mmwave_studio_01_00_00_00\\mmWaveStudio\\Scripts\\..\\PostProc\\adc_data.bin"

    如果BIN文件是有内容的，那么检查一下你的matlab runtime是否成功安装？
    Install Matlab Runtime Engine (Version 8.5.1): It is used to run the Post-Processing utility within mmWaveStudio. in.mathworks.com/.../MCR_R2015aSP1_win32_installer.exe

    参考文档："C:\ti\mmwave_studio_01_00_00_00\docs\mmwave_studio_user_guide.pdf"

    谢谢
  • 0 回复 Wesley He
    Prodigy 60 points

    你好！

    我也遇到了相同的问题，之前的操作都是passed，一切正常，最后在点击Trigger Frame后output也显示Frame End async event received!，但接收的bin文件都为0kb，后续也无法点击PostProc，与帖主遇到的问题一样，不知道最后帖主是怎么解决的呢，您又有什么样的建议呢~

  • 0 回复 Wesley He
    Prodigy 20 points

    您好，我的问题也类似，adc_data_Raw_0.bin能够采集到数据，但是adc_data.bin的大小为0 kb，点击PostProc后即会出现和题主同样的问题。

  • 0 回复 zhuang huang
    Prodigy 70 points

    采集板寄存器配置的问题 选为软件触发

  • 0 回复 user5792212
    Prodigy 20 points

    谢谢，采集卡设置的是软件触发；我是win7系统，换台win10的电脑就可以。但是还是不知道这个错误的根本原因。

  • 0 回复 zhuang huang
    Intellectual 585 points
    你好，我想问一下，在哪个位置设置采集卡的触发？我在sensor configuration选项卡里只找到了frame的触发方式选择