This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS61022电池转换异常,导致芯片击穿

Other Parts Discussed in Thread: TPS61022

TPS61022异常导致击穿。焊接C84电容后,PIN2 SW极易击穿,导致短路到地,请问这个是因为什么问题?以下是原理图和SW测试波形。

  • Hi
    输入电流过大,C84增加了反应速度,输入的瞬态变化也会加快,可能造成输入有电压过冲。
    建议在输入最前面增加TVS管,因为只要存在电池插拔,输入很可能有超过5.5V的电压(主要这个芯片输入耐压有些低)
    其次输入走线尽量宽一点,输入电容尽量靠近芯片输入脚和电感输入脚。