This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

dlp lightcrafter 4500经相机触发会死机重启

我是用了大恒的相机来触发光机,相机工作在连续采集模式下,光机触发正常,并且能够采集到点云。

然后我把相机改成的软件触发模式,即通过软件发送指令触发相机,然后相机再通过trigger线触发光机。在这种模式下,光机只能被触发一次,随后光机便会重启,不再响应触发信号了。

  • 您好!

    感谢使用TI的DLP产品。

    请问是如何配置LightCrafter4500EVM的?两种方式下配置是否有不同?是否有检查在软件触发相机模式下,相机输出给EVM的信号是否正常,比如电平波形等。

    Best regards