Hi:
PMID 管脚理论上可以从 USB 5V 和 BAT 供电,部分样机仅有 USB 5V 时, 异常的样机确认一下PMID的电容4.7uF尽量靠近PMID脚(同样,Vin的输入电容也尽量靠近Vin脚) ,同时确认负载没有超过0.3A. 如果没有问题,确认是否是芯片问题(直接更换确认), 芯片内部主要就是LDO式的控制,不应该存在你提到的时序问题,要先电池。
Other Parts Discussed in Thread: BQ25122 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1023845/bq25122-enable-charging-while-cd-is-high 器件型号: BQ251…
Other Parts Discussed in Thread: BQ25121A , BQ25125 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1049329/bq25120a-any-other-differences-with-bq25121a…