C6000™多核

TMS320C6000 指令集仿真器技术参考

user 21ic — Tue, 08 Jul 2014 03:32:06 GMT

此手册包含以下信息：

· 命名TMS320C6000 指令集仿真器的配置所支持的TMS320C6000™ (C6000™) 数字信号处理器(DSP)

· 列出每种设备上已经建模的模块和引脚

· 说明仿真器的功能和限制

· 解释了如何配置仿真器

· 提供了一些关于周期精度的基准数据

TMS320C6000 DSP 外设概览参考指南

user 21ic — Tue, 08 Jul 2014 03:30:48 GMT

C6000™ 器件平台由使用先进超长指令字(VLIW) 的第一代现成DSP 组成，通过增加指令级并行性获得高性能。VelociTI™ VLIW 架构使用多个并行操作的执行单元以在单个时钟周期执行多条指令。并行性是超高性能的关键，可以使这些DSP 极大超越传统设计的性能。

用于C6000 的TI-RTOS 2.00 入门指南

user 21ic — Fri, 04 Jul 2014 09:45:59 GMT

This manual describes TI-RTOS for C6000. The version number as of the publication of this manual is v2.00.

跟踪分析仪用户指南

user 21ic — Fri, 04 Jul 2014 09:45:11 GMT

Trace Analyzer is provided by Code Composer Studio (CCS) to enable non-intrusive debug and analysis of system activity. The TI target device sends data about the target’s actions over a dedicated port. This allows you to examine the history of the processor’s actions without affecting the real-time behavior of the target application.

TI-RTOS 2.00 用户指南

user 21ic — Fri, 04 Jul 2014 09:44:06 GMT

This manual describes TI-RTOS and contains information related to all supported device families. The version number as of the publication of this manual is v2.00.

TMS320C6743 DSP技术参考手册

user 21ic — Mon, 30 Jun 2014 02:56:15 GMT

This Technical Reference Manual (TRM) describes the System-on-Chip (SoC) and each peripheral in the device. The SoC consists of the following primary components:

• DSP subsystem and associated memories

• A set of I/O peripherals

系统分析用户指南

user 21ic — Mon, 30 Jun 2014 02:54:47 GMT

System Analyzer is a tool suite that provides visibility into the real-time performance and behavior of your software. It allows you to analyze the load, execution sequence, and timing of your single-core or multicore target applications. System Analyzer included the features in both the Tools > RTOS Analyzer and Tools > System Analyzer menus in CCS. Together, they are made up of a number of components.

SYS/BIOS IPC 1.25 用户指南

user 21ic — Fri, 27 Jun 2014 07:47:38 GMT

This document provides an overview of the Inter-Process Communication (IPC) APIs. This version of this document is intended for use with IPC version 1.25 on targets that use SYS/BIOS

TMS320C6457 DSP EMAC/MDIO用户指南

user 21ic — Fri, 27 Jun 2014 07:45:51 GMT

This document provides a functional description of the Ethernet Media Access Controller (EMAC) and Physical layer (PHY) device Management Data Input/Output (MDIO) module integrated with the TMS320C6457 device.

OMAP35x 应用处理器技术参考手册

user 21ic — Fri, 27 Jun 2014 07:44:20 GMT

The OMAP35x family of high-performance, applications processors are based on the enhanced OMAP™ 3 architecture and are integrated on TI's advanced 65-nm process technology

SYS/BIOS (TI-RTOS Kernel) v6.40用户指南

user 21ic — Thu, 26 Jun 2014 03:49:37 GMT

This manual describes SYS/BIOS, which is the Kernel component of TI-RTOS. SYS/BIOS is also called "TI-RTOS Kernel" in some documents. This document describes SYS/BIOS 6.40, which is the version of SYS/BIOS included as a component of TI-RTOS 2.00. If you plan to use SYS/BIOS within Code Composer Studio (CCS), version 6.0 of CCS or higher is required.

仿真和跟踪头技术参考手册

user 21ic — Thu, 26 Jun 2014 03:48:26 GMT

This technical reference describes how to incorporate Texas Instruments' next-generation emulation header on a board with a trace-enabled DSP.

TI网络开发套件v2.21 API 参考指南

user 21ic — Thu, 26 Jun 2014 03:47:19 GMT

This Reference Guide for the NDK is mainly a programming API reference guide. It is intended to aid in the development of network applications and describes the various API functions provided by the stack libraries.

TI网络开发套件v2.21用户指南

user 21ic — Thu, 26 Jun 2014 03:46:15 GMT

The document covers NDK programming as it applies to the TMS320C6000, Cortex-A8, and ARM9 programming environment, including Code Composer Studio™ (CCStudio) Development Tools. It is not intended as an API reference. This manual also provides necessary information regarding how to effectively install, build, and use the Network Developer's Kit (NDK) in user systems and applications.

The latest version number as of the publication of this guide is NDK v2.21.

TMS320 DSP/BIOS v5.42用户指南

user 21ic — Thu, 26 Jun 2014 03:44:36 GMT

This manual describes DSP/BIOS 5.42, which may have been installed as part of the Code Composer Studio (CCS) 5.3 or higher installation. The standalone installer for DSP/BIOS 5.42 can be used with CCS 5.1 or CCS 5.2. (CCSv3 and CCSv4 are no longer supported by DSP/BIOS.)