2592的datasheet中写的频率切换时间最短为22us,而我们通过设置频率切换的时间最开始为1ms,后面变为300us,想请教一下当寄存器烧写后中间为啥要空一段时间2592才开始震荡
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
2592的datasheet中写的频率切换时间最短为22us,而我们通过设置频率切换的时间最开始为1ms,后面变为300us,想请教一下当寄存器烧写后中间为啥要空一段时间2592才开始震荡
您好,感谢您对TI产品的关注!为更加有效地解决您的问题,我们建议您将问题发布在E2E英文技术论坛上(https://e2e.ti.com/support/clock-timing-group/clock-and-timing/f/clock-timing-forum ),将由资深的英文论坛工程师为您提供帮助。