您好,LM131应用电路中,6pin和1pin接的+Vs和-Vs 什么情况要接?此下可调电阻应该设置多少?
可不可以直接通过CL和电阻47接到GND?
谢谢
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
您好,我没找到LM131这款型号呢,不知是不是已经停产了?您有这款器件的数据手册吗 ?
恩看到了,这是之前NS的器件。TI目前也有类似电压频率转换器件,比如VFC320.
关于您的问题的话,这里pin6和1接V+和V-的目的是使用可调变阻器形成分压电路,用来调节offset,保证输出偏差尽量小。
通常应用的话施加输入信号,调节这里的滑动变阻器,使得输出精度达到最佳。
您说的直接通过CL和电阻47接到GND也是可以的,但是offset是否是您可以接受的范围内。