在TIDEP0076下,当按照tiduc48b的guide去进行dlp的三维重建过程中,
进行第四步标定相机,
然而相机却无法启正常启动,拍摄到的只是黑压压的一片,
请问这是什么原因,是哪里的参数没设置正确吗,还是需要额外的设置一些东西。
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
在TIDEP0076下,当按照tiduc48b的guide去进行dlp的三维重建过程中,
进行第四步标定相机,
然而相机却无法启正常启动,拍摄到的只是黑压压的一片,
请问这是什么原因,是哪里的参数没设置正确吗,还是需要额外的设置一些东西。