This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] INA121:原理图检查

Guru**** 1939340 points
Other Parts Discussed in Thread: INA121, PGA2500, PGA2505
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/amplifiers-group/amplifiers/f/amplifiers-forum/1354042/ina121-schematic-check

器件型号:INA121
主题中讨论的其他器件: PGA2500PGA2505

您好  

您能帮助检查 INA121原理图以及是否需要  

e2e.ti.com/.../am8mp01.pdf

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    大家好、Gareth:  

    是否旨在使用 DS1882设计可编程增益? 我担心可能会出现稳定性问题。 我曾尝试对此进行仿真、但在输出上没有看到任何振铃。 通常、我们建议增益设置电阻器尽可能靠近 RG 引脚、从而更大限度地减少 RG 引脚上的任何电容悬挂。 Rg 引脚非常敏感、需要在布局中特别小心、以使增益电阻器尽可能靠近引脚。  

    我建议使用专为 PGA2500或 PGA2505等可编程增益而设计的器件。  

    https://www.ti.com/product/PGA2500

    https://www.ti.com/product/PGA2505

    我注意到+和-如下图所示翻转了。  

    此致、  

    克里斯·费瑟斯通