This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[FAQ] [参考译文] [常见问题解答]如何在 CCS 工程中使用 C2000 SysConfig 中的开关按钮来更改器件封装或切换到电路板视图?

Guru**** 633805 points
Other Parts Discussed in Thread: SYSCONFIG
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/microcontrollers/c2000-microcontrollers-group/c2000/f/c2000-microcontrollers-forum/1130472/faq-how-do-i-use-the-switch-button-in-c2000-sysconfig-within-a-ccs-project-to-change-my-device-package-or-switch-to-board-view

Thread 中讨论的其他器件:SysConfig

我在 SysConfig 中使用了开关按钮来更改我的器件/封装/板、但是当我保存、关闭并重新打开文件时、它会显示旧器件/封装/板。

当我尝试编译工程时、我收到有关 PinMux 的错误消息、其中显示 SysConfig 文件无效、因为 GPIO/PIN/板 PIN 不是有效选项。

如何在器件/封装/电路板之间正确切换?

C2000培训视频:https://training.ti.com/search-catalog/field_language/ZH-CN?keywords=C2000&start%5Bdate%5D=&end%5Bdate%5D=

C2000培训小程序码