This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[FAQ] [参考译文] [常见问题解答] DP83867IR:如何使用 DP83867#39 BIST 和状态寄存器测试链路质量?

Guru**** 633805 points
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/interface-group/interface/f/interface-forum/1163314/faq-dp83867ir-how-to-test-the-link-quality-using-dp83867-s-bist-and-status-registers

器件型号:DP83867IR

DP83867 PHY (以及其他 TI 工业和汽车 PHY)能够:  

1.生成封包化数据

捕获接收到的帧数

3.捕获接收到的错误帧数。

这些参数可用于检查 PHY 的吞吐量、而无需取决于 MAC 或外部数据发生器/校验器。

此外、内部信号质量寄存器可用于检查链路的运行状况。 请查看随附的文档以了解更多详细信息:  

e2e.ti.com/.../How-to-utilize-diagnostic-test-suite-of-Ethernet.pdf