This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[FAQ] [参考译文] [常见问题解答] DS90UB954-Q1:CSI-2通道 SER 与 DES

Guru**** 633805 points
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/interface-group/interface/f/interface-forum/1166173/faq-ds90ub954-q1-csi-2-lanes-ser-vs-des

器件型号:DS90UB954-Q1

为954编程的 CSI-2通道数是否需要与953/935的输入通道数相匹配?

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    不可以、串行器和解串器的通道数是独立的。 但是、必须确认已编程的通道数和通道速度将提供大于或等于总 输入带宽的输出总带宽  ​