This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] TUSB8044A:未使用的端口仍保留为 NC?

Guru**** 633805 points
Other Parts Discussed in Thread: TUSB8044A
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/interface-group/interface/f/interface-forum/1190739/tusb8044a-unused-ports-left-as-a-nc

器件型号:TUSB8044A

您好!

我计划 在我的设计中使用 TUSB8044A IC、假设我是否只需要使用3个下行端口而不是所有4个可用端口。 应该将其保留为无连接、还是应该将其下拉?

感谢您的澄清。

谢谢

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    您好!

    未使用的 USB 和 PW_CTRL 引脚如果不使用、则可保持未连接状态。

    谢谢

    David