Thread 中讨论的其他器件: TSER953
工具与软件:
尊敬的 TI:
请发送有关如何根据 EQ 电平解读 D3寄存器状态的信息。
谢谢!
Abel
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
您好、Abel:
请参阅以下适用于 TDES954的 E2E: https://e2e.ti.com/support/interface-group/interface/f/interface-forum/953827/ds90ub936-q1-aeq_status-register-0xd3-clarification
在 AEQ 上也可以使用以下应用手册作为参考: https://www.ti.com/lit/an/snla301/snla301.pdf?ts 252Fwww.google.com%252F
此致!
佐伊
您好、Abel:
为了验证电缆质量和系统、我们建议对 TSER 和 TDES PCB 以及电缆进行 S 参数测量。 这将确认是否在 V3Link 器件的整个工作频率范围内满足总通道要求。 MAP 结果可能会随运行环境而变化。 总体而言、MAP 将显示是否可以找到特定选通位置和 EQ 设置、而不满足错误标准、并且锁定在驻留时间内保持稳定。
此致!
佐伊