• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 0 subscribers
  • Views 79 views
  • Users 0 members are here
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] SN74LVC157A：在哪里连接外露焊盘？

admin
Guru**** 1578975 points
请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/logic-group/logic/f/logic-forum/946150/sn74lvc157a-where-to-connect-the-exposed-pad

器件型号：SN74LVC157A

大家好、

我对上述芯片的外露焊盘有疑问。

我应该将 EP 连接到 GND 还是将其保持悬空(连接到 PCB、但没有特定信号)？ 我在数据表中找不到此信息。

BR、
Stefan