This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] TPS2559:故障引脚电压电平

Guru**** 2124260 points
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1045528/tps2559-fault-pin-voltage-level

器件型号:TPS2559

是否可以将1.8V 逻辑 GPIO 用于 FAULT 和 EN 信号?

此致

  • 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

    没关系。

    对于 TI 的政策、我将首先单击 Resolved 按钮。

    如果您有任何其他问题、请随时与我联系。

    如果您认为问题已解决、请单击"问题已解决"按钮。

    谢谢。