This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] TMDXIDK5718:将标准可加载 CCS 工程(通过 CCS 等)转换为可远程处理可加载工程

Guru**** 633805 points
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1132075/tmdxidk5718-turning-a-standard-loadable-ccs-project-via-ccs-etc-into-a-remoteproc-loadable-project

器件型号:TMDXIDK5718

大家好、

使用的组件:
TI-processor-sdk-linux-rt-am57xx-evm-06.03.00.106-linux-x86
TI-processor-sdk-rtos-am57xx-evm-06.03.00.106-linux-x86
CCS 12.0

问题:
如何将现有的标准 DSP CCS 工程(可通过具有 cinit 入口点的 CCS 加载)转换为可加载的可远程处理工程(具有资源表、HWint0入口点等)?

我已经从该线程下载了示例项目、并尝试相应地修改我的项目、但它从未真正奏效:
e2e.ti.com/.../rtos-am5728-ipc-example-build-error

根据我到目前为止的猜测、XDC 文件中必须有一组特定的指令来实现这一目的(例如、加载某些模块、如 PM 模块)。

非常感谢、

Tileo Wenzel