This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[参考译文] AM6548:AM6548 U-boot -将固件加载到 R5_1 (rproc 1)

Guru**** 1996415 points
Other Parts Discussed in Thread: AM6548
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。

https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1381794/am6548-am6548-u-boot---load-firmware-onto-r5_1-rproc-1

器件型号:AM6548

工具与软件:

您好!

我似乎无法在 AM6548 R5F 内核1上使用 rproc 在 U-boot 中加载固件。 我已经尝试使用本线程中描述的类似方法禁用锁步:  

https://e2e.ti.com/support/processors-group/processors/f/processors-forum/770144/ccs-am6548-can-not-connect-to-mcu_pulsar_cortex_r5_1

但我尝试加载到 R5_1 (rproc load 1)的任何固件似乎都会导致 U-boot 挂起。 同样、我在固件应用的链接器脚本中使用任何超过0x70100000的存储器。  

在 U-boot 中是否还需要启用其他功能? 我可以通过 CCS 加载这些使用 大小为0xF2000的内存范围0x70100000的应用 。 也许有一个 GEL 脚本、我应该将其行为移植到 U-boot init?

谢谢!