你好!
目前我们有个消毒枪项目主控采用MSP430FR2311IPW16,13#pin(P1.5口)接地出现300Ω的电阻,有的阻值偏高或偏低很多,每块PCB板出现的阻值不一样,目前导致产品按钮无法使用。之前量产没有这个问题,请问如何处理呢?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
你好!
目前我们有个消毒枪项目主控采用MSP430FR2311IPW16,13#pin(P1.5口)接地出现300Ω的电阻,有的阻值偏高或偏低很多,每块PCB板出现的阻值不一样,目前导致产品按钮无法使用。之前量产没有这个问题,请问如何处理呢?