我们将在春节假期期间对网站进行维护,可能暂时无法访问,同时工程师回复将有所延迟,敬请谅解.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AM2634: 使用sbl_jtag_uniflash工程操作flash

Part Number: AM2634
Other Parts Discussed in Thread: UNIFLASH

1.擦除成功,烧写成功,第三步校验的时候失败,板子重新上电后就无法debug进入console选项界面,显示如下:

[Cortex_R5_0] ASSERT: 0.5s: soc/am263x/soc_rcm.c:SOC_rcmGetCoreFout:1521: FOut != 0 failed !!!

0x60000000 全部为0

该情况如何能让板子恢复正常?

2.使用另一块新的CC板,该板子没有运行过sbl的工程,进入console选项进入第一步擦除,直接显示擦除ERROR,0x60000000全部显示FF,这个不能理解。