bq24296RGER,10个样板。其中两片接电池可正常使用,但在第一次插入5V适配器充电时,瞬间SYS被击穿,对地短路。
这时芯片依旧能充电,但充电电流只有110mA左右。
另外8片目前正常。原理图如下:
负载峰值在1.7A左右,请帮忙分析一下可能的原因和对策。
目前10片烧了两片,不敢量产。
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
bq24296RGER,10个样板。其中两片接电池可正常使用,但在第一次插入5V适配器充电时,瞬间SYS被击穿,对地短路。
这时芯片依旧能充电,但充电电流只有110mA左右。
另外8片目前正常。原理图如下:
负载峰值在1.7A左右,请帮忙分析一下可能的原因和对策。
目前10片烧了两片,不敢量产。
您好,请参考下面的文档:
https://e2e.ti.com/support/power-management/f/196/t/878463 for BQ2429X: Schematic Review and PCB Layout Design Tips and https://e2e.ti.com/support/power-management/f/196/t/875388 for BQ2419X/2429x FAQs.
VBUS(VBUS引脚上的电压),IVBUS,VBAT(BAT引脚上的电压),IBAT,VSYS,ISYS等测试条件是什么?