This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Please help review design for 5V control
Thank you
HI
电路要结合你的设计功能来看，主要的问题在于on信号的控制，你这个采用1.8V即可，不需要接电阻到GND, 其他的建议你通过测试确认，例如CT电阻，大小都可以，影响输出电压上升下降时间。输出电容也可大可小，太大，inrush电流也会很大，可以适当小一点。
hi Johnsin
Thanks you for your support
