This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
BQ76952发现上电配置完这个芯片后退出工厂模式的时候ddsg和dchg管脚会瞬间拉高600ms的时间，有没有办法不拉高呢？
您好，配置完以后退出出厂模式是哪个模式，CONFIG_UPDATE mode还是shutduwn mode
CONFIG_UPDATE
您好，确认将POR设0，确认是不是退出CONFIG_UPDATE 时POR造成的，
详细请参考TRM Table 12-17. Battery Status Register Field Descriptions (continued)
