Other Parts Discussed in Thread: BQSTUDIO
通过EV24700,bq27200与bqstudio能够正常通信,寄存器信息也能读出来
但我在data memory设置参数时,比如设置design capacity,将默认的3000改为5000,然后点击write all,出现了下面这个提示,这个是啥意思?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
您好,请参考下面文档1.1 Initial Last Measured Discharge配置design capacity