Other Parts Discussed in Thread: BQ40Z50
Hi 您好
目前設計應用 充電時 0~99% 閃爍 100%恆亮 使用單顆設計
不需要放電容量燈號顯示 , 線路設計如下是否有誤 , 附上參數設定
1 . 是不是不能支持單顆
2. 至少要2顆 LED 應用嗎?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi 您好
目前設計應用 充電時 0~99% 閃爍 100%恆亮 使用單顆設計
不需要放電容量燈號顯示 , 線路設計如下是否有誤 , 附上參數設定
1 . 是不是不能支持單顆
2. 至少要2顆 LED 應用嗎?
您好,
We have an FAQ page that discusses this solution, you can find it on the main BQ40Z50 FAQ page: https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1106884/faq-bq40z50-faqs
The schematic looks correct for single LED display.