• State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 45 subscribers
  • Views 542 views
  • Users 0 members are here
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

[参考译文] BQ2.589万：无法设置最大充电电流

BQ25890: 充电电流问题

Albert.Qiu
Prodigy 220 points
Part Number: BQ25890

硬件上2 D+和 3D-是拉低的，没有实际的协议输入。

现在遇到问题是，修改完充电电流到2A, 然后Vbus断开，读取reg0B寄存器值是00100111，充电电流是不是被限制到了500mA

有没有办法，在D+ 和D-没有实际协议输入的时候，可以实现充电电流到2A或者3A？