Other Parts Discussed in Thread: GPCCHEM
我们现在使用bq40z50-R4的芯片，制作了一个双节的电池；Term Voltage 是 6000mV；
当电池电压过放达到 4.0 V（单节2.0 V），再次充电需要达到 7.6V 后，有时更高，Remaining Capacity才会增加；
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
1- The FD and TD thresholds might be set a little bit too high. Please set them to the below recommended.
2- Make sure Impedance Track is enabled. I noticed, update status is 2. It should be set to 6
|Gas Gauging||State||Update Status||2|