Other Parts Discussed in Thread: BQ40Z50
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
您好，Please change the load select to 1, the gauge will use the present avg discharge current to predict FCC. It looks like the gauge is overestimating capacity from last cycle.
I am inclined to say that the gauge is reporting 0% SOC because the terminate voltage is set lower than the ChemID lowest voltage (see below). Terminate Voltage in the settings is set to 5100mV / 2 = 2550 mV. The lowest voltage in the matched ChemID is around 3000mV.