实际原理图如下,限流电阻取值修改为100mΩ。CS的RC取值750Ω和1nF。+15V输出短路,只达到0.5V的限流,输出保持了3A多的电流,并没有进入0.625V的重启式限流。请问这是什么原因?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
您好
感谢您对TI产品的关注!为更加有效地解决您的问题,我们建议您将问题发布在E2E英文技术论坛上(https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum),将由资深的英文论坛工程师为您提供帮助