1. 如何实现Core 0启动后通过串口接收CCS编译的.Out文件,Core 0将这个文件加载到Core 1并运行。(上电时只有Core 0通过Flash启动,Core 1不运行任何程序。在Core 0接收到串口发过来的.Out文件后再引导Core 1启动)
2. legacy COFF和eabi(ELF)这两种.Out文件如何解析?比如起始地址,长度等。
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
1. 如何实现Core 0启动后通过串口接收CCS编译的.Out文件,Core 0将这个文件加载到Core 1并运行。(上电时只有Core 0通过Flash启动,Core 1不运行任何程序。在Core 0接收到串口发过来的.Out文件后再引导Core 1启动)
2. legacy COFF和eabi(ELF)这两种.Out文件如何解析?比如起始地址,长度等。
1、
如何实现Core 0启动后通过串口接收CCS编译的.Out文件,Core 0将这个文件加载到Core 1并运行。(上电时只有Core 0通过Flash启动,Core 1不运行任何程序。在Core 0接收到串口发过来的.Out文件后再引导Core 1启动)
以下文档会有一些简单的说明
4 Keystone I Bootloader FAQ
https://www.ti.com.cn/cn/lit/an/spracn2/spracn2.pdf
legacy COFF和eabi(ELF)这两种.Out文件如何解析?比如起始地址,长度等。
参考: