This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

IWR1443: How to configure the sampling mode on IWR1443 as complex 1x or complex 2x?

Part Number: IWR1443

Hi

There is some question about the setting of IWR1443 With DC1000. 

From this discussion we can know the difference about complex 1x and complex 2x mode. e2e.ti.com/.../2654999

Since I know to configue the ADC sampling mode as "real only" mode or "complex mode", which is set in "ADCBUFCFG" register. I have no idea to find some configuration about the complex 1x or 2x mode. Could you please give me some information about the related register for this configuration? Or could I configure this on the "mmWave Studio", which is a configue GUI Tools for mmWave Device. 

If can not do this on this type of mmWave board, could you please inform me which type of mmWave device support this configuration, which is the switch between complex 1x and complex 2x.

Could you give me some help? Thanks.