Other Parts Discussed in Thread: UNIFLASH
之前因为RS232连接不上的问题,使用UNiflash将芯片内容擦除过,但擦除之后虽然能连接RS232,但在设置为SOPmode2或4模式时,DS1灯亮红灯,请问这是什么原因?如果是硬件出错,应该怎么排除故障?电路板已经调整为SPI模式了。
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
之前因为RS232连接不上的问题,使用UNiflash将芯片内容擦除过,但擦除之后虽然能连接RS232,但在设置为SOPmode2或4模式时,DS1灯亮红灯,请问这是什么原因?如果是硬件出错,应该怎么排除故障?电路板已经调整为SPI模式了。
您的SOP[2:0]配置的是110,不是001,请看板子user guide上的描述Table 4. SOP Switch Information。
https://www.ti.com/lit/ug/spruim4b/spruim4b.pdf
另外,请参考下面网站上的连接步骤。
AWR1843BOOST mmw demo运行指南 - 嵌入式处理 - 技术文章 - E2E 设计支持 (ti.com)