由于春节假期,帖子审批以及工程师回复将会有所延迟,敬请谅解.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC1125: RX FIFO无数据

Part Number: CC1125

使用一台CC1125当做发射源,另一台CC1125用作接收,发射模式为Packet Tx模式,接收的寄存器设置从SmartRF中导出,接收一段时间后停止接收,使用cmd命令查询RX FIFO(寄存器地址:0x3E80~0x3EFF),发现相应地址的值都是0,请问这是怎么回事?