在设计电源切换电路中,使用28V主电源和25V电池供电,当输入到LM5050为高电平时,GATE控制的MOS管关断,输出的电压为28V转12V输出;当输入为低电平时,MOS管打开,输出为25V,但是当电路逻辑电平为高电平时,MOS管没有关断,直接是25V输出,所以请教一下主要什么原因问题,谢谢!!!
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
在设计电源切换电路中,使用28V主电源和25V电池供电,当输入到LM5050为高电平时,GATE控制的MOS管关断,输出的电压为28V转12V输出;当输入为低电平时,MOS管打开,输出为25V,但是当电路逻辑电平为高电平时,MOS管没有关断,直接是25V输出,所以请教一下主要什么原因问题,谢谢!!!
主要是LM5050在28V和电池电压25V同时供电时,OFF为高电平,GATE脚控制的MOS管始终关不断,MOS管相当于一个理想的二极管,所以当28V高电平进来时,一直是25V输出