硬件设计为norflash nonemux启动,自己写一个裸机程序烧写到norflash。此裸机程序执的功能是pinmux高位地址线,然后拷贝预先烧写在norflash其他地方的rtos例程到DDR中运行。请问这个裸机程序的startup_ARMCA8.S该如何修改,am3358.lds文件又该如何修改,里面规定的每个段应该放在什么地方
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
硬件设计为norflash nonemux启动,自己写一个裸机程序烧写到norflash。此裸机程序执的功能是pinmux高位地址线,然后拷贝预先烧写在norflash其他地方的rtos例程到DDR中运行。请问这个裸机程序的startup_ARMCA8.S该如何修改,am3358.lds文件又该如何修改,里面规定的每个段应该放在什么地方