• 状态
  • 已锁定 已锁定
  • 个回复 3 个回复
  • 名订阅用户 9 名订阅用户
  • 次查看 2657 次查看
  • 用户 0 名在线用户
选项
选项
相关

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC2640R2F 使用smartRF flash programmer 2V1.8.1无法烧录的问题

user5102557
Prodigy 20 points
Other Parts Discussed in Thread: CC2538

V1.8.1 FLASH PROGRAMMER 2

V1.7.5 FLASH PROGRAMMER 2

如图示，烧录器使用无锡谷雨的XDS110 LITE，上位机使用V1.8.1的flash programmer，驱动安装正常，上位机和烧录器的连接正常，但在下载如图的hex文件时，一直下不进去，提示“Failed to read last page”。

将上位机V1.8.1卸载，下载V1.7.5，烧录则是成功的。

系统是64位WIN7，请问有没有人了解这个问题是不是上位机版本问题？

  • 0
    TI__Guru**** 188340 points
    SmartRF Flash Programmer and SmartRF Flash Programmer 2 run on 32 and 64-bit versions of Microsoft® Windows 7 and Windows 10.
    系统和应该没问题，1.8.0能用吗？
  • 0 回复 Viki Shi
    Prodigy 20 points
    1.8.1直接从官网下，1.7.5是同事发给我的。
    刚刚又从官网下了1.8.0，实测OK，bin文件和hex文件都可以下载。
  • 0 回复 user5102557
    TI__Guru**** 188340 points
    1.8.1 版本新增的功能及已知的问题，你对照排查一下：
    New Features and Enhancements
    Added support for Intel-hex records "Extended Segment Address" (SRFPROG-388).
    The JTAG pin setting is shown in the status window in GUI and log for CLI (SRFPROG-390).
    Updated emupack to version 8.1.0.00005 (LPRFTOOLS-771).

    Known issues
    Using verification action when programming over the serial interface will fail if the file contains bits that lock bootloader access during programming (SRFPROG-377).
    GUI: The "Auto-detect" checkbox state is not remembered between sessions. It is always enabled on startup (SRFPROG-233).
    GUI: When the resolution is set to low and the scaling is set high on a display, the application can get larger than the size of the screen or the windows can get compressed. The workaround is to adjust the settings or undock the image overrides (SRFPROG-360).
    XDS200 Debugger: Flash Programmer 2 reports "Enumeration failed" if XDS200 firmware is outdated. See Troubleshooting section of the Flash Programmer 2 Help document.
    CC2538 Edit tab: Reading "CCA" or "All flash" on CC2538 variants with less than 512KB flash will fail on the first attempt. The workaround is to connect to the device before reading memory (SRFPROG-194).