Other Parts Discussed in Thread: ADS1299 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/data-converters-group/data-converters/f/data-converters-forum/1567995/ads1299-pins-burn-during-powerup 器件型号: ADS1299 工具/软件: 您好…
Part Number: ADS1299
在进行verilog代码编写时,我使用5MHz的sclk,tsccs,Delay time, final SCLK falling edge to CS high,这个时间手册上写的是大于4个tclk,如果我不等待这个时间,数据传输时会有许多点的值变为0,但是我进行延时操作后,adc只能输出不到一秒的数据然后整个系统就停止了,想请问您一下这个问题怎么解决
Other Parts Discussed in Thread: ADS1299 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/data-converters-group/data-converters/f/data-converters-forum/1568404/ads1299-individual-device-programming-and-gain-settin…
Part Number: ADS1299 Hello,there are 2 ways in datasheet about power supply. I want to konw which is the best about EEG acquisition. If AVDD–AVSS max =5.25 means I can use AVDD=2.5V, AVSS= -2.5V or AVDD=1.5V, AVSS= -1.5V ?
Other Parts Discussed in Thread: ADS1299 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/data-converters-group/data-converters/f/data-converters-forum/1375171/ads1299-ads1299-spi-clock-rate-issue 器件型号: ADS1299 工具与软件…
Other Parts Discussed in Thread: ADS1299 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/data-converters-group/data-converters/f/data-converters-forum/1593992/ads1299-impedance-test-shows-incorrect-performance-in…
Other Parts Discussed in Thread: ADS1299-4 , ADS1299 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/data-converters-group/data-converters/f/data-converters-forum/1562007/ads1299-4-about-precision-gain-error 器件型号: ADS1299…
Other Parts Discussed in Thread: ADS1299 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/data-converters-group/data-converters/f/data-converters-forum/1386994/ads1299-ads1299-eeg-measurement-electrode-on-ear-pod-…
Part Number: ADS1299
您好!我使用MCU的5V,3.3V和GND为ADS1299EVM供电和接地(对应EVM的5V,3v3和DGND),我每隔150ms读取16ms数据。下图是示波器探针在交流耦合的设置下测量EVM的5V和AGND得到的。从示波器的图像中可以看到在读取的时候(也就是每150ms的开头16ms),有大量的噪声干扰,这会影响到我的数据采集(叠加之后会有一个较为严重的伪迹),这个问题为什么会出现以及我该如何解决这个问题