Other Parts Discussed in Thread: AFE4400 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/data-converters-group/data-converters/f/data-converters-forum/806036/afe4400-reading-register-does-not-provide-data-on-miso…
Other Parts Discussed in Thread: AFE4400 , AFE4405 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/data-converters-group/data-converters/f/data-converters-forum/713773/afe4405-afe4400-and-afe4405-are-certified-med…
Other Parts Discussed in Thread: AFE4400 我有一个设计上用到两块AFE4400芯片,想把这两片芯片挂在同一个SPI口上与MCU通信。对于多设备连在同一个SPI上,手册上有如下描述:
“ Note that when the AFE4400 is deselected, the SPISOMI, CLKOUT, ADC_RDY,PD_ALM, LED_ALM, and DIAG_END digital output pins do not enter…
Other Parts Discussed in Thread: AFE4400 1、 术手册中有关ADC采样频率的说明,在第10页中说采样率为4*PRF
而在第40页中关于ADC Data的中可以采样率为16*PRF
但是如果我将占空设置为25%以下时,采样率又该如何计算?
2、 我在测试中发现,改变LED发光时间长度和对应的采样时间长度,采集到的原始波形是不相同的,发光时间越短波形只有一个峰,
发光时间达到一定长度时,就会出现两个波峰,这种现象如何解释,其他条件都一样,如下图中是有两个波峰…