Part Number: AM625 hello everyone:
I am using a module based on I2C0 bus on AM6254, and I need to use SMBus Quick mode to scan the module. However, AM6254 does not support this mode.
The specific printing information is as follows:
root@evse:~# ls /dev…
Other Parts Discussed in Thread: AM62L 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1486004/am62l-processor-sdk-emmc-boot-doesn-t-work 器件型号: AM62L-PROCESSOR-SDK 主题中讨论的其他器件…
Other Parts Discussed in Thread: AM62L 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1518375/am62l-use-wkup_uart0-but-don-t-generate-device-nodes 器件型号: AM62L 工具/软件: …
Other Parts Discussed in Thread: AM62L 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1588304/am62l-am62l-u-boot-build-fails-due-to-undocumented-op-tee-requirement-in…
Other Parts Discussed in Thread: AM62L 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1597685/am62l-yocto-u-boot-build-error-missing-binman-node-on-am62l 器件型号: AM62L …
Other Parts Discussed in Thread: AM62L 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1548686/am62l-am62l-evm-reduced-pincount-boot-mode-support 器件型号: AM62L 工具/软件: 尊敬的专家…
Other Parts Discussed in Thread: AM62L 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1566125/am62l-flash-emmc-use-sdcard-boot-from-emmc-error-can-not-read-u-boot-i…
Part Number: AM62L
I attempted to connect a MIPI display to the DSI interface exposed on the AM62L and expected it to function properly. However, the driver exits abnormally during probe, and the mipi_dsi_attach function returns an error code. From the…