您好,请参考下面的内容:
This depends on the accuracy of the sense resistor and any noise and how you measure the current. The gauge uses a comparator with programmable voltage thresholds. If you read the current from the gauge, make sure it's not an averaged current…
Part Number: BQ28Z610-R1 Other Parts Discussed in Thread: BQ28Z610bq28z610-r1通讯口给了上拉电平,在没有和系统通讯时,芯片主动对外发送上图波形信号,信号出现的时间间隔为1S-14S-S-14S。在bq40z50r2上没有测到这个现象。
请问应该怎么解释这个信号的出现?可以消除吗?
您好,是否用GPCRB做过低温补偿
When you use the GPCRB tool it is optimizing for the data provided, with this kind of low temperature any small changes can impact accuracy greatly, it is tuned for that specific pack to get the highest accuracy, when it is used with…
Other Parts Discussed in Thread: BQSTUDIO 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1194487/bq28z610-r1-distinguish-original-and-r1 器件型号: BQ28Z610…
Other Parts Discussed in Thread: BQ34Z100 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1193917/bq28z610-r1-wrong-valid-charge-termination 器件型号: BQ28Z610…