Search tips
Showing 1,999 results View by: Thread Post Sort by
    Answered

  • BQ40Z50-R2: 学习完成后，Full charge Capacity跟实际容量相差很大

    Resolved
    Part Number: BQ40Z50-R2 Other Parts Discussed in Thread: GPCCHEM 您好！ 学习完成后，发现Full charge Capacity跟实际容量相差很大， 又重新做了一次充放电，Full charge Capacity的值跟实际仍然相差很大，实际容量是25200mAh，Full charge Capacity的值是19851mAh，相差这么大正常吗，不正常的话什么原因导致的？选的化学ID不合适的话能学习成功吗？以下是相关的配置： …
    • Resolved
    • Answered

  • RE: BQ40Z50-R2: FullChargeCapacity可以设置吗？

    Resolved
    好的，谢谢！

  • BQ40Z50-R2: Learning Cycle Issue

    Part Number: BQ40Z50-R2 Other Parts Discussed in Thread: GPCCHEM , BQ40Z50 Hi TI Team, When we used the BQ40Z50-R2 gas gauge to do the Learning cycle test, we encountered a issue. The Learning cycle had been successful, but the obtained battery capacity…

  • RE: BQ40Z50-R2: 1

    如果是自己设计的板子，可能会有各种问题，可以买一个开发板对比一下 www.ti.com.cn/.../BQ40Z50EVM-561
    • Answered

  • BQ40Z50-R2: BQ40Z50-R2 LED显示问题

    Resolved
    Part Number: BQ40Z50-R2 充电停止后LED 充电指示还会闪烁一分钟，这个时间可以缩短？需要哪里配置 TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian Chinese Simplified Hungarian Russian Chinese Traditional Indonesian Sl…
    • Resolved
    • Answered

  • BQ40Z50-R2: BQ40Z50-R2 烧录文件

    Resolved
    Part Number: BQ40Z50-R2 Other Parts Discussed in Thread: BQ40Z50-DEVICE-FW 您好：哪里可以下载 BQ40Z50RSMR-R2 EVM .srec文件烧录
    • Resolved

  • BQ40Z50-R2: 通过开启内部均衡，我怎么知道那个电芯在均衡中

    TI Thinks Resolved
    Part Number: BQ40Z50-R2 OperationStatus 可以看到 均衡状态，我怎么知道 具体是那个单体在均衡中 ，在线求助？？？ CB (Bit 28): Cell balancing status 1 = Active 0 = Inactive 下面是我的 均衡配置

  • RE: BQ40Z50-R2: 通过单片读取SMbus读取电压、soc都正常，但是无法读取化学ID

    您好， 由于长时间未收到回复，本贴关闭。

  • RE: BQ40Z50-R2里面Reserve Cap修改需要重新golden learning么

    您好， 感谢您对TI产品的关注！为更加有效地解决您的问题，我需要多一些时间查看这款芯片，稍后会为您解答。

  • RE: BQ40Z50-R2: Could I only change some parameters (not all)?

    I believe regarding the calibration this can be done individually on multiple units (~20) then the calibration values can be averaged and inputted for the calibration parameters, then pulling the .srec will contain these values for when programmed to…

Didn't find what you are looking for? Post a new question.