E2E™ 设计支持
E2E™ 设计支持
  • 用户
  • 站点
  • 搜索
  • 用户
  • E2E™ 中文设计支持 >
  • 论坛
    • 放大器
    • API 解答
    • 音频
    • 时钟和计时
    • 数据转换器
    • DLP® 产品
    • 接口
    • 隔离
    • 逻辑
    • 微控制器
    • 电机驱动器
    • 处理器
    • 电源管理
    • 射频与微波
    • 传感器
    • 站点支持
    • 开关与多路复用器
    • 工具
    • 无线连接
    • 参考译文
    • 存档组
    • 存档论坛
  • 技术文章
    • 模拟
    • 汽车
    • DLP® 技术
    • 嵌入式处理
    • 工业
    • 电源管理
  • TI 培训
  • 快速入门
  • English
  • 更多
  • 取消


搜索提示
找到 183 个结果 查看 问题 帖子 排序依据
    Answered
  • [参考译文] BQ76972:VBAT 电阻值

    admin
    admin
    已解决
    请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1390737/bq76972-vbat-resistor-value 器件型号: BQ76972 工具与软件: 使用较少数量的电芯(例如3或4电芯)和多个并联的 MOSFET 时、是否需要降低此值…
    • 已回答
    • 1 年多前
    • 电源管理(参考译文帖)
    • 电源管理(参考译文帖)(Read Only)
  • Answered
  • BQ76972: In SPI communication, after each byte sent is delayed, the chip returns 0XFFFF00 multiple times

    lin quan
    lin quan
    已解决
    Part Number: BQ76972 1, the current problem is that using the official demo code, there is a delay time for each byte sent in SPI communication. If this delay time is not added, it will cause communication problems. The return is 0XFFFF00. Only the SPI…
    • 已回答
    • 1 年多前
    • 电源管理
    • 电源管理论坛
  • Answered
  • [参考译文] BQ76972:如果要完全复位芯片、我应该怎么做?

    admin
    admin
    已解决
    请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1445441/bq76972-what-should-i-do-if-i-want-to-reset-the-chip-completely 器件型号: BQ76972 工具与软件: 你(们)好 …
    • 已回答
    • 1 年多前
    • 电源管理(参考译文帖)
    • 电源管理(参考译文帖)(Read Only)
  • Answered
  • [参考译文] BQ76972:电池组件中的电芯和电池连接过程

    admin
    admin
    已解决
    Other Parts Discussed in Thread: BQ76972 , BQ76952 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1453844/bq76972-cell-and-bat-connection-procedure…
    • 已回答
    • 1 年多前
    • 电源管理(参考译文帖)
    • 电源管理(参考译文帖)(Read Only)
  • BQ76972: The RST_SHUT pin was used to reset, but the previously set parameters did not fully restore the default values

    lin quan
    lin quan
    TI 认为已经解决
    Part Number: BQ76972 hi: use chip: BQ7697204 Configure the chip to enable REG1 to output 5V, REG2 to output 1.8V, and then reset via the RST_SHUT pin: Pull the RST_SHUT pin up 300ms and pull it down again, and find that the REG1 output can only recover…
    • 1 年多前
    • 电源管理
    • 电源管理论坛
  • Answered
  • [参考译文] BQ76972:如何启用 FET

    admin
    admin
    已解决
    请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1386749/bq76972-how-to-enable-fet 器件型号: BQ76972 工具与软件: 我正在尝试 使用 i2c 子命令 0x0096 ALL_FETS_ON () 0x0095 ALL_FETS_OFF…
    • 已回答
    • 1 年多前
    • 电源管理(参考译文帖)
    • 电源管理(参考译文帖)(Read Only)
  • Answered
  • [参考译文] BQ76972:部分自主式 FET 驱动器如何查看 FET 是否会自动启用

    admin
    admin
    已解决
    Other Parts Discussed in Thread: BQSTUDIO , BQ76972 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1493572/bq76972-partially-autonomous-fet-driver-how…
    • 已回答
    • 1 年多前
    • 电源管理(参考译文帖)
    • 电源管理(参考译文帖)(Read Only)
  • Answered
  • [参考译文] BQ76972:当 CS 置为无效时、MISO 引脚不会释放

    admin
    admin
    已解决
    Other Parts Discussed in Thread: BQ76972 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1441274/bq76972-miso-pin-not-releasing-when-cs-is-de-asser…
    • 已回答
    • 1 年多前
    • 电源管理(参考译文帖)
    • 电源管理(参考译文帖)(Read Only)
  • Answered
  • [参考译文] BQ76972:可以使用 CAN BQ76952 EVM 进行评估

    admin
    admin
    已解决
    Other Parts Discussed in Thread: BQ76952 , BQ76972 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1422094/bq76972-can-bq76952-evm-be-used-for-evalu…
    • 已回答
    • 1 年多前
    • 电源管理(参考译文帖)
    • 电源管理(参考译文帖)(Read Only)
  • BQ76972: For not using cell pin, and the pins are short, set the Settings: Configuration: what are the benefits of Vcell Mode?

    lin quan
    lin quan
    TI 认为已经解决
    Part Number: BQ76972 hello: I do not use the chip's 6, 7, 8, 9, 10 cell voltage acquisition channels and short-connect them. I whether it is necessary to set the Settings: Configuration: Vcell Mode register, can make use of the protection of the feet…
    • 1 年多前
    • 电源管理
    • 电源管理论坛
<>

未找到您搜索的内容?发布一个新问题吧。

  • 发布新问题