您好
https://www.ti.com/lit/ds/symlink/cc2640r2f.pdf
根据 CC2640R2F的datasheet显示,CC2640R2F可以用以下仿真器请您参考(datasheet第50页有相关具体说明)
IDEs and Compilers: Code Composer Studio Integrated Development Environment (IDE): • Integrated development environment with project…
Part Number: TMS320F28032
仿真器初始化错误
debugger initialization error
“ccs the primary document entity can not be opened”
ccs反馈如图所示?这种问题是因为什么原因导致的?应该怎么解决?
P.s 已安装110驱动等,烧录ti的280x系列例程。
Part Number: PROCESSOR-SDK-J721E Question 1: Can the XDS100V2 debugger be used to debug the J721EXSKG01EVM? There is an interface mismatch between them; the XDS100V2 has a 14-pin interface, while the JTAG interface on the J721EXSKG01EVM is 20 pins. Is it…
Other Parts Discussed in Thread: CC1101 , CC2431 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/wireless-connectivity/sub-1-ghz-group/sub-1-ghz/f/sub-1-ghz-forum/1349374/cc1110-cc1111-cc1110-cc-debugger-this-device…
您好
您的console里面有两个报错-260和-1170。
-260解释如下
可以尝试升级firmware,方式如下
https://software-dl.ti.com/ccs/esd/documents/xdsdebugprobes/emu_xds110.html
-1170解释如下
This error is caused by the inability of the JTAG debugger to access the DAP or one of its ARM subcores…